Cisco Systems 805 manual Required Equipment

Required Equipment

Caution Periodically check the resistance value of the antistatic strap, which should be between 1 and 10 megohms (Mohms).

Required Equipment

You need to provide the following equipment:

•The hub, server, workstation, or PC that you plan to connect to the Ethernet port. The server, workstation, or PC must have a 10- or 10/100-Mbps network interface card (NIC).

•The asynchronous modem or channel service unit/data service unit (CSU/DSU) that you plan to connect to the serial port.

•The serial cable that connects the router to the serial device. For information on selecting and ordering the serial cable, refer to Appendix A, “Selecting a Serial Cable.”

•The terminal or PC with which you plan to configure the software or troubleshoot the router.

•If you plan to mount your router on a wall or other vertical surface, two number-six, 3/4-inch (M3.5 x 20 mm) screws. If the wall to which you plan to mount your router is drywall, you must also provide two hollow wall-anchors (1/8 inch with 5/16-inch drill bit or M3 with 8-mm drill bit) to secure the screws.

2-4Cisco 805 Router Hardware Installation Guide