Cisco Systems 805 manual Connecting a Server, PC, or Workstation

Installing the Router

Figure 2-2 Connecting a Hub

Cisco 805 router

1. Set HUB/NO HUB button.

HUB	ETHERNET
NO HUB
LINK	CONSOLE

10 BASE T

2.Connect yellow cable to yellow Ethernet port.

Cisco 805

SERIAL

Cisco 1528 Micro Hub 10/100

					1X
SPEED					2X	ETHERNET 3X
	LED
100BaseTX		1
10BaseT	SOLID		2	3	4
		5	6
	BLINK			7	8
					6X
						7X

3.Connect other end of cable to hub.

4X

8X

MDI MDI-X

4.If applicable, check setting of hub equivalent of router HUB/NO HUB button.

17284

Connecting a Server, PC, or Workstation

Before connecting the server, PC, or workstation, do the following:

•Make sure that the device has a 10- or 10/100-Mbps NIC.

•Refer to Table 2-1 to determine how to set the router HUB/NO HUB button. Follow the steps in Figure 2-4 to connect a server, PC, or workstation.

2-8Cisco 805 Router Hardware Installation Guide