Cisco Systems 805 manual Mounting the Router, Wall-Mounting Brackets Bottom of Router

Mounting the Router

Figure 2-7 Wall-Mounting Brackets (Bottom of Router)

	Front panel of router
Mounting	7	5	Mounting
bracket		8 in. (19.35 cm)	bracket
Bottom
of router

11671

When mounting the router, the following conditions must be met:

•Because you will use the front panel LEDs as status and problem indicators, the router front panel must face upward and be easily visible.

•The back panel must face downward to reduce strain on the cable connections.

•The power supply must rest on a horizontal surface, such as the floor or a table. If the power supply is not supported, it might place strain on the power supply cable and cause it to disconnect from the connector on the router back panel.

To mount the router, follow the steps in Figure 2-9. The last page of this manual provides a template for measuring the distance between the screws.

Installing the Cisco 805 Router 2-15