Kodak Kodak 10/100 Network Interface Card, 3H0610 manual Troubleshooting 12-1

I

N T R O D U C T I O N

Contents

11.7	Printing from UNIX System V Systems	11-6
11.8	Printing from VMS Systems	11-7
	11.8.1 Printing in Raster Mode from Windows and Macintosh Platforms	11-7

12 Troubleshooting		12-1
12.1	Verifying Standalone Printer Functions	12-5
12.2	Verify Network Connectivity	12-6
12.3	Verify Network Parameters	12-6
12.4	Verify Application and Printer Parameters	12-7
12.5	Novell NetWare Installations	12-7
	12.5.1 Netware debug via Telnet session	12-8
12.6	NT Installations	12-10
12.7	AppleTalk Installations	12-11
	12.7.1 PostScript mode	12-11
12.8	TCP/IP Installations	12-12

Appendix A NIC Telnet		A-1
A.1	NIC Telnet Mode	A-1
A.2	NIC Telnet Session	A-1
A.3	Telnet Diagnostic and Configuration Commands	A-2
A.4	Sample Telnet Session depicting Monitor options	A-2
	A.4.1 CÑConfigure Console (for status monitoring)	A-2
	A.4.2 DÑDisplay summary configuration parameters	A-2
	A.4.3 FÑFlash firmware load enable/disable	A-3
	A.4.4 IÑDisplay/set IP address	A-3
	A.4.5 LÑLimit monitor network access by password	A-4
	A.4.6 NÑNetwork protocols menu	A-4
	A.4.7 TÑTCP/IP (sockets, lpd, rarp, bootp, tftp) options	A-5
	A.4.8 ZÑReset nvram to factory defaults	A-6
	A.4.9 +ÑPrint PostScript test page	A-6
A.5	Finishing Up a Telnet Session	A-6

viii July 1998