Kodak 3H0610, Kodak 10/100 Network Interface Card manual Network Protocols Enabled

Apple/Macintosh Environments

4.Save the list and quit TeachText.

5.Double click on the Apple Printer Utility icon.

6.From the plodding menu, select Window and then Selector.

7.If there is a router on the network, select the appropriate zone for the printer.

8.Select the printer.

Note: When the Printer is opened, a warning may state that this is a spooler and that all utility features may not work. Click Continue.

9.Select Download PostScript File from the File menu. 10.Select the file to download.

11.When downloading is complete, quit the program.

If an error occurs while downloading a configuration file, an error message will appear. If a log file is created after downloading a file, an error occurred.

9.4.6.1 Using the NIC Config File

The table below lists the NIC configuration options that you can change by editing and downloading the NIC Config.

Option (Default is in Parenthesis)

Option	Choice	Description
EtherTalk phase	1 or (2)	AppleTalk revision level.
EtherTalk Zone	Zone Name	AppleTalk zone the printer resides in.
	Network Protocols Enabled
Sockets	(Yes) or No
LPD	(Yes) or No
Interwar	(Yes) or No
EtherTalk	(Yes) or No
	Operational	Parameters
Set IP address	Set IP Address	Use to specify an IP address for NIC when
	(0.0.0.0)	using TCP/IP.
Reset the NIC	Yes or (No)	Forces the NIC to restart when the printer is
		power cycled.
Reset NVRAM to	Yes or (No)	Forces NVRAM values to be returned to their
defaults		defaults when the printer is power cycled.

Note:

M

A C I N T O S H

July 1998 9-7