Kodak 3H0610 manual Printer/NIC Installation and ConÞguration Overview, Yes

I

N T R O D U C T I O N

Kodak 10/100 NIC Introduction and Configuration

Printer/NIC Installation and ConÞguration Overview

Step 1:Determine your Network and Printing Environment. (Ch1:Intro/Overview)

NIC supports TCP/IP, Novell Netware, AppleTalk & Native Windows (NetBeui) Protocols.

Step 2: Gather Necessary Hardware & Software Components. (Ch1:Intro/Overview)

NIC, NIC ConÞg S/W, Printer, Printer ConÞg S/W, i.e.PostScript Drivers and Raster Export

Modules

NIC Pre-installed in Printer?	No	Step 3: Install the NIC in the Printer.
		(Ch2:NIC Install) Requires NIC, Phillips or
		T10 Torque Screwdriver, and Static Strap.

Yes

Step 4: ConÞgure the NIC. (Ch3:FastManage, Ch9:Apple/Macintosh, Appendix: A Telnet)

Recommendation: Use defaults until successful network printing is demonstrated.

Complete the following if using TCP/IP. (TCP/IP minimally requires an IP Address). The quickest method (when IP = 0.0.0.0) is to use ÒarpÓ and ÒtelnetÓ commands.

1)Set NIC mode switches in Telnet mode (D1 up, D2 down) and power cycle printer.

2)Use arp -s <IP Address> <NIC Ethernet Address>

3)Use telnet <IP Address> 2002.

5)Follow Telnet Ethernet>TCP/IP>Set IP menus to set IP address and then Reset the NIC.

6)Power cycle the printer.

Use Server	Yes	Step 5:ConÞgure Server (Ch4:Novell, Ch7/8 Windows
Print Queues?		NT, Ch10:Unix)

No

Step 6: ConÞgure Workstations for PostScript and/or Raster Mode Printing. (Ch5-8 Windows, Ch9 Macintosh)

Install proper PostScript Driver (for printer in PostScript mode) and/or Kodak Export Module plug-in (for printer in raster mode).

Step7:Printer in PostScript Mode	Step7:Printer in Raster Mode
(Ch11:Printing)	(Ch11:Printing)
Use File > Print	Use File > Export
from Applications and	from Adobe PhotoShop and Select
Select the Kodak Printer.	the Kodak Printer.

1-6 July 1998