Kodak 3H0610, Kodak 10/100 Network Interface Card manual Changing the Host Name for the Devices

Windows - FastManage Configuration Utilities

2.Type the Þle name in the Download File Name Þeld, or click Browse to search for the Þles.

3.Enter the IP address of the device to which you are downloading, then click Download to download the Þle.

Note: The download process may take minutes (2-3000 packets). To verify a proper download, you could telnet (See Appendices A & B) into the NIC and monitor the progress of the download, resetting of the NIC, etc.

Note: We recommend that only one NIC be upgraded at a time since mis- synchronization of multiple downloads might result in corruption of NIC Þrmware and the necessity to recover. Refer to Appendix C for Þrmware upgrading and recover procedures.

3.4.3.5 Changing the Host Name for the Devices

1.Click the Node Properties icon (second from right). A Node Properties window appears.

2.Click on the desired node to change its name.

The current node name appears at the top of the box, on the right- hand side, the current name of the node appears (unless given a name, it will say unknown).

3.Erase the current name.

4.Deselect the Visible box to make a device invisible.

5.Enter a name and click OK.

F

A S T M A N A G E

July 1998 3-13