Kodak Kodak 10/100 Network Interface Card, 3H0610 manual Kodak 10/100 NIC Utilities for Macintosh

Apple/Macintosh Environments

9.1Kodak 10/100 NIC - Utilities for Macintosh

Use the Kodak 10/100 NIC - Utilities for Macintosh software to remotely configure the parameters for the 10/100 NIC installed in Kodak printers or proofers.

IMPORTANT: Configuration for this 10/100 NIC is accomplished exclusively by using the remote configuration utilities for Windows, Macintosh or Unix platforms. Use of the printer front control panel is NOT relevant for configuring this 10/100 NIC. Confirm that it is set up for printing with the Kodak printers or proofers.

Note: If you are in a mixed platform environment and require changes to additional protocol configuration parameters beyond the general parameters configurable with Macintosh utilities, use Utilities for Windows (FastManage) from a Windows platform or use TELNET on any platform that supports TCP/IP. See Appendix A for information about using Telnet.

M

A

C

I

N

T

O

S

H

9-2 July 1998