Kodak Kodak 10/100 Network Interface Card, 3H0610 manual Finishing Up a Telnet Session

A P P E N D I X

A

NIC Telnet

Modify?, yes or no (y or n)?:n

TCP/IP menu options: (S) Socket Options

TCP Sockets enabled

Modify?, yes or no (y or n)?:n

TCP/IP menu options: (L) LPD Options

LPD enabled

LPD mode: DonÕt time out on printer error

Modify?, yes or no (y or n)?:n

TCP/IP menu options: (X) Exit

A.4.8 ZÑReset nvram to factory defaults

Also reset IP address?, yes or no (y or n)?:n

nvram reset to factory defaults

A.4.9 +ÑPrint PostScript test page

Printing PostScript test page on printer

A.5 Finishing Up a Telnet Session

If, when you Þnish a telnet session, you made no changes, you may simply end your Telnet session.

If you changed one or more parameters:

1.Type R to Reset the NIC using the new parameters

2.Power cycle the printer to synchronize the printer and NIC.

To prevent unauthorized Telnet sessions that could cause conÞguration changes, set the faceplate mode switches to Normal mode (D1 & D2 in UP position), then power cycle the printer.

A-6 July 1998