Kodak Kodak 10/100 Network Interface Card, 3H0610 manual DOS Tools for NetBIOS

F

A S T M A N A G E

Windows - FastManage Configuration Utilities

3.Enter net? at a DOS prompt for more information about the utilities.

3.10.1DOS Tools for NetBIOS

If you have problems installing and using the NetBIOS management tools, the following suggestions might help:

¥When using the showprn.exe tool, and the printer/NIC does not appear, issue the command with a -d0, -d1or -d2switch:

showprn.exe -d1

This causes showprn to use an alternate stack to send the packet. This problem shows up sometimes in systems that have multiple NICs or multiple protocols loaded. If a -d1switch was used with the showprn.exe tool, use it on the NBMON command line.

¥If the IPX protocol is loaded and running on a system running Windows 95, the check box for Send NetBIOS over IPX should not be checked.

Send NetBIOS over IPX is located in the Control Panel-->Network- ->IPX Compatible Protocol screen.

¥Open up the Control Panel, Networks screen. Choose NetBEUI protocol. Check the checkbox marked Set this Protocol to be the Default Protocol. In Windows 95, it is located in the Advanced Options window.

3-32 July 1998