Kodak Kodak 10/100 Network Interface Card, 3H0610 Telnet Diagnostic and ConÞguration Commands

A P P E N D I X

A

NIC Telnet

Unix:

Telnet <IP Address> <Port Address>

Ex: Telnet 123.234.10.5 2002

A.3 Telnet Diagnostic and ConÞguration Commands

C Ñ ConÞgure console (for status monitoring)

D Ñ Display summary conÞguration parameters

F Ñ Flash Þrmware load enable/disable

H Ñ Displays help menu

I Ñ Display/set IP address

L Ñ Limit monitor network access by password

N Ñ Network protocols menu

R Ñ Reset the NIC

Z Ñ Reset parameters to factory defaults + Ñ Print PostScript test page

A.4 Sample Telnet Session depicting Monitor options

Ver 6.1 Build 7, Datecode 4/1/1997 10:12

Type ÒSÓ to see current status

Type ÒDÓ to see current conÞguration

Type Ò!Ó to enter monitor

Type ÒAÓ to abort connection

A.4.1 CÑConfigure Console (for status monitoring)

Console options:

1 (Off)

2 (On - via network only)

<enter> (don't change/continue)

A.4.2 DÑDisplay summary configuration parameters

Command [?,C,D,E,F,H,I,L,N,Q,R,S,Z,*,+] --> d

Kodak 10/100 NIC (3011EK)

Firmware revision 6.1.5, Build 7, Datecode 3.13 1997 16:02

A-2 July 1998