Kodak Kodak 10/100 Network Interface Card Pconsole, Configuring Novell NetWare 4.x for AppleTalk

N O V E L L

N

E

T

W A R E

Novell NetWare

2. On the server, back up the sys:\system\atps.cfg Þle.

Note: Make sure you include the beginning and end quotes in the following commands.

Edit the atps.cfg Þle, and add a line with the Kodak printer AppleTalk name and its associated AppleTalk zone to the list of printers in the following format:

<Appletalk printer name>:<Appletalk zone>

For example, enter the following command:

ÒKodak Printer:Kprinter_ZoneÓ

Note: Make sure you include the quotation marks in the command.

If no queue is stated, a NetWare queue associated with the AppleTalk printer name, NW_Kodak_Printer, is created. You can verify this using

PCONSOLE.

To create a different queue name, enter the following command:

<Appletalk name>:<Appletalk zone> -o <queuename>

For example, enter:

ÒKodak Printer:KPrinter_ZoneÓ -o KPrinter_q

3.Save the atps.cfg Þle.

4.Load atps -s -v

Use the -v [verbose] option to view the atps activity and to verify that the contents are executed properly.

Your server can now use the same print services that Macintosh computers use to access a Kodak printer.

4.5.2Configuring Novell NetWare 4.x for AppleTalk

Use the NetWare 4.x utilities provided to set up AppleTalk. This setup is menu driven, so you do no need to edit any Þles.

4-10 July 1998