P R I N T I N G

Printing

11.4 Printing in PostScript Mode from Windows/DOS Systems

11.4.1 Printing from Windows

To print from applications to a Kodak printer in PostScript mode:

IMPORTANT: To avoid printing problems, make sure that ÒCtrlDÓ job termination is disabled in Printer PostScript properties.

1.Select File>Page Setup and verify settings consistent with your printer.

2.Select File>Print.

3.Select the printer that was created by the Add Printer mechanism.

4.Check printer settings for consistency with current printer media before selecting OK.

11.4.2Printing from DOS

NPrint

Print to the printer as if it were any other Novell print server. For example, use the Novell CAPTURE command to redirect one of the LPT ports to a queue serviced by the Network Interface Card. If the Þle server is named raisa and the queue is named lp1, the command to redirect to LPT1 would be:

CAPTURE /S=raisa /Q=lp1

Use NPRINT to print as shown in the following example:

NPRINT myÞle S=raisa Q=lp1

You can include the /notify option to send a message to users who send jobs once the jobs successfully print. For example:

NPRINT myÞle S=raisa Q=lp1 /notify

Copy

Use COPY to print to an LPT port redirected to a network port.

COPY myÞle LPT1

11-4

July 1998

Page 128
Image 128
Kodak 3H0610, Kodak 10/100 Network Interface Card manual Printing in PostScript Mode from Windows/DOS Systems