Kodak Kodak 10/100 Network Interface Card Printing from VMS Systems, Multinet conÞgure/printers

Printing

11.8 Printing from VMS Systems

Printing with MultiNet on a VMS host

The NIC works with a MultiNet stream queue on a VMS host. Invoke MultiNet's printer conÞguration utility to add a VMS print queue by entering the following command:

multinet conÞgure/printers

The printer conÞguration utility will prompt you for the IP address, the protocol type, and the queue name. Specify lpd as the protocol type, and ps as the queue name.

The change takes effect at the next system boot up. To make it effective immediately, invoke the COM procedure:

@MULTINET:REMOTE-PRINTER-QUEUES

Printing with WIN/TCP on a VMS network or with DEC UCX 2.0

Refer to your userÕs guide for details on installation and printing. Specify ps as the remote queue name and the host name of the NIC as the remote machine name.

11.8.1 Printing in Raster Mode from Windows and Macintosh Platforms

Kodak supports printing in raster mode only through the use of Kodak printer-speciÞc export modules for Adobe Photoshop.

To select raster mode,

1. Select Export from the File menu.

A Select a Kodak Printer screen appears.

2.Click on Network or Update to view and select printers that are in raster mode.

After you select a printer, an export module print screen appears; you can now set up printer/printing parameters and export raster Þles from Adobe Photoshop.

P R I N T I N G

July 1998 11-7