Kodak 3H0610, Kodak 10/100 Network Interface Card manual Windows

Windows 95

6 Windows 95

Refer to Kodak Printer/NIC Installation and ConÞguration Overview in Chapter 1 for overall conÞguration process steps and details. The steps described in this chapter are highlighted in the list below.

Step 1: Assess your network/printing environment

Step 2: Gather the necessary components

Step 3: Install the NIC Hardware, if needed

Step 4: ConÞgure the NIC, if necessary

Step 5: ConÞgure the print servers, if needed

Step 6: ConÞgure the printer on user workstations

Step 7: Printing

6.1ConÞgure the NIC

If possible, start with the default parameters. TCP/IP protocol is the only protocol that minimally requires conÞguration of an IP address. Refer to FastManage, Chapter 3, or Telnet, Appendix A. If you need to conÞgure NIC network parameters in Windows environments.

6.2ConÞgure the Workstation for Printing

You should verify that this platform is supported for printing to your printer or proofer. Refer to the user guides and README Þles provided with your printer or proofer for information about installing software to support PostScript and raster printing, calibration, etc. If needed, refer to Appendix E, Technical Assistance.

W

I

N D O W S

9

5

July 1998 6-1