P R I N T I N G

Printing

If a Kodak driver is not available, you can use a generic PostScript driver or LaserWriter driver with the Kodak printer PPD Þle to generate PostScript output.

11.2Changing between PostScript and Raster Printing Modes - Kodak 8xxx series Printers

1.Press Setup/Select on the display panel when READY appears in the panel.

Power

Error

Print Cancel

scrollSetup/Select

2.Press until SETUP:MODE appears.

3.Press Setup/Select to access the SETUP:MODE submenu.

4.Press until MODE:POSTSCRIPTÓor MODE:raster appears. The currently selected version is indicated by an asterisk (*).

5.Press Setup/Select to make your choice.

6.Press until MODE:EXIT appears.

7.Press Setup/Select.

8.Press until SETUP:EXIT appears.

9.Press Setup/Select.

If you change the mode, wait for the printer to reinitialize and return to

READY.

11-2

July 1998

Page 126
Image 126
Kodak 3H0610, Kodak 10/100 Network Interface Card manual Press Setup/Select