Cisco Systems OL-4552-01 manual Locating Switch Images for Downloading, 10-13

Page 13

Chapter 10 Cisco WAN Manager Operations

Downloading Software and Firmware

Cisco IGX and Cisco BPX nodes maintain the primary version of the network operating software in RAM of the active controller card. If redundant controllers are installed, the standby controller maintains a secondary version, which may or may not be the same release level as the primary. The primary version of the operating software can typically be the same release level on all nodes in the network.

All Cisco IGX and Cisco BPX card modules also have card and version specific firmware, which is stored in flash memory on the front card. If applicable, firmware upgrades are downloaded to the switch controller card, and distributed to the other cards within that switch. Cisco IGX and Cisco BPX nodes do not provide long-term storage of firmware images on the controller card.

Cisco MGX nodes do not use network-switching software as on the Cisco IGX and Cisco BPX nodes. The Cisco MGX nodes use firmware that controls shelf and card operation. The Cisco MGX controller retains a copy of firmware for service modules, and upgrades are downloaded from a management station.

The TFTP/FTP protocol downloads software and firmware images from the CWM workstation to WAN switches.

The CWM Image Download downloads software and firmware images, and monitors the download process.

Note A CWM workstation is not required to download the software images. You can download the software images using any machine that can run a FTP client/server process.

Locating Switch Images for Downloading

Cisco Connection Online (CCO) provides a web page, WAN Switching Upgrade Planner, which provides information about the latest Cisco software product. If you have a Cisco Connection Online account, you can order or download software directly to your system. The URL for CCO software and firmware is located at http://www.cisco.com/kobayashi/sw-center/wan/wan-planner.shtml.

The WAN Switching Upgrade Planner web page provides the following links:

•Product Information for WAN Switching Products

•Release Information for WAN Switching Products

•Documentation and Release Notes

•Previous Software for WAN Switching Products

•Downloading Cisco WAN Switching Software

•Downloading Cisco WAN Card Firmware

Related Topics

•“Managing with the Configuration Save and Restore Utility” section on page 10-2

•“Downloading Software and Firmware” section on page 10-12

•“Preparing the Cisco BPX and Cisco IGX Switch to Download Software or Firmware” section on page 10-14

•“Downloading Switch Software or Firmware from the CWM Workstation to a Switch” section on page 10-18

•“Cisco IGX and Cisco BPX Conventions” section on page 10-19

•“Cisco MGX Conventions” section on page 10-19

 

 

Cisco WAN Manager User’s Guide

 

 

 

 

 

 

Release 15, Part Number OL-4552-01 Rev. C0, January 27, 2005

 

 

10-13

 

 

 

 

 

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 10-1 Cisco WAN Manager Operations10-2 Launching the Configuration Save and Restore Utility10-3 Saving Node Configurations from CWM10-4 Configuration Save Window10-5 10-6 Saving Node Configurations for Cisco BPX and Cisco IGX NodesReserved for firmware image 10-710-8 Following example is shown10-9 10-10 Restoring Node Configurations from CWM10-11 Configuration Restore window10-12 Downloading Software and Firmware10-13 Locating Switch Images for Downloading10-14 10-15 Following example is used for the Cisco IGX node10-16 Following example is used for a Cisco IGX node10-17 10-18 Cisco MGX Conventions Cisco IGX and Cisco BPX Conventions10-19 10-20 Launching the Image DownloadProcessing the Downloaded Image Image Download Access Tabs10-21 Image Download In-Progress 10-2210-23 Click Download10-24 Deleting Images10-25 10-26
Top Page Image Contents