Cisco Systems OL-6217-01 manual CiscoWorks Wlse Snmp Community Entry Screen

Page 19

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

To configure the necessary credentials on the CiscoWorks WLSE follow these steps:

Step 1 Log into the CiscoWorks WLSE.

Step 2 Navigate to Devices > Discover. Select Device Credentials on the left-hand side table of contents (see Figure 9).

Step 3 Select SNMP Communities on the left-hand side table of contents (see Figure 9).

Step 4 In the form, enter the appropriate SNMP credentials. Consult the CiscoWorks WLSE online-help for details on SNMP credential entry syntax.

Figure 9 CiscoWorks WLSE SNMP Community Entry Screen

Step 5 Select Device Credentials > Telnet/SSH User/Password from the table of contents on the left-hand side (see Figure 10).

Step 6 Enter the appropriate Telnet or SSH credentials for logging in to the managed access points for configuration (see Figure 10). Consult the CiscoWorks WLSE online help for details on Telnet or SSH credentials entry syntax.

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

	OL-6217-01	19

Image 19

Contents Corporate Headquarters Cisco Aironet 1400 Series Wireless Bridge Deployment Guide N T E N T S Contents Book Title Xxxxx-xx Audience Acroymns and Terms Cisco Swan Framework Overview Cisco Swan Layers Cisco Swan Logical View Shows the access point-based WDS solution WDS Wlccp Cisco Swan Framework ComponentsHardware Components Software ComponentsImplementing the Cisco Swan Framework Common Tasks CiscoSecure ACS NAS Setup Adding Username and Password Credentials CiscoSecure ACS User Setup AAA-apconfig-radsrvuser username password password AAA-apconfig#radius-server localCiscoWorks Wlse Snmp Community Entry Screen CiscoWorks Wlse Telnet/SSH Credentials Entry Configuring the WDS Access Point Access Point-Based WDS Solution ConfigurationWds-apconfig#username username password password Wds-apconfig#hostname hostnameWds-apconfig#wlccp wds priority priority number Configuring the Infrastructure Access PointWds-apconfig#wlccp wnm ip address wlse ip address Infra-apconfig-line#access-class access-list number Managing the Access Points with the CiscoWorks WlseInfra-apconfig#hostname hostname Infra-apconfig#username username password passwordWds-ap#show wlccp wds ap Switch-Based WDS Solution ConfigurationValidating the Configuration Configuring the Catalyst 6500 SupervisorCreate the Vlan between the supervisor and Wlsm Configuring the WDS on the WlsmWlsmconfig#hostname hostname Wlsmconfig#snmp-server view iso iso includedWlsmconfig# wlccp wnm ip address wlse ip address Configuring the Infrastructure Access PointsInfra-apconfig#wlccp ap wds ip address wlsm ip address Wlsm# show wlccp wds ap Validating the SetupWlsm# show wlccp wnm status Mobility ap Sup720# show mobility statusFast Secure Roaming with Cckm Infra-apconfig-if-ssid#authentication network-eap eap-group When Using Multiple Encryption Types or VLANsInfra-apconfig#interface dot11Radio Infra-apconfig-if#encryption mode ciphers cipher-typeClick Profile Management Configuring ACU to use CckmCisco Swan Framework Radio Management Cisco Swan Radio Management FeaturesBuilding Tool Pop-Up Window Preparing to Use Cisco Swan Radio ManagementCisco Swan Radio Management Features Page OL-6217-01