Cisco Systems OL-6217-01 manual Cisco Swan Radio Management Features

Page 36

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

When the building tool is open, follow the wizard steps to create a new building and import floorplans for each of the building floors. Consult the CiscoWorks WLSE online help for assistance if necessary.

When the buildings are created and floorplans are imported, managed access points are visible in the lower left-hand pane of the Location Manager. Drag and drop the access points to the appropriate locations on the floors. Accurate access point placement is important because the CiscoWorks WLSE radio management tools use the Location Manager access point positions as a reference when making internal computations.

As an optional step, access point antenna parameters can be configured by right-clicking on the access point in the Location Manager. The antenna parameters include antenna type, azimuth, down-tilt (from horizon), height, and any estimated cable loss.

When the buildings are created, the access points are placed, and any access point antenna parameters are configured, the Cisco SWAN framework is ready for radio management.

Cisco SWAN Radio Management Features

An extensive discussion of the deployment and use of Cisco SWAN framework radio management features is beyond the scope of this document. This section provides some guidance on the next steps for Cisco SWAN framework radio management.

The Cisco SWAN framework radio management features use data gathered by three methods: access point radio scan, client walkabout, and radio monitoring. The access point radio scan and radio monitoring are required methods, and the client walkabout is an optional procedure.

Typically, the first radio management step is to run an access point radio scan. This scan can be run from the Radio Manager > AP Radio Scan option in the CiscoWorks WLSE or as a step in the assisted site survey tool. The scan is required to create an initial calibrated path loss model of the RF environment, which considers path-loss between access points (resulting from natural attenuation factors in the RF environment, such as walls) and identifies potential sources of contention in the RF environment.

The client walkabout is an optional process in which a WLAN client walks the coverage environment, associating with access points, and collecting specific data for the system to use in radio coverage calculations. The client walkabout can be completed as a step in the assisted site survey tool or through the Radio Manager > Client Walkabout interface. A good client walkabout requires a thorough walkthrough of the coverage environment, ideally in a grid pattern. Data points are gathered symmetrically across the coverage environment. If the client walkabout procedure cannot meet these basic requirements, you should not do one.

Radio monitoring is a process in which infrastructure access points and optional authenticated and associated WLAN clients regularly sample the RF environment during normal operations. The sampled data is gathered by the WDS, aggregated, and passed to the CiscoWorks WLSE. Radio monitoring data is used in coverage calculations, rogue access point detection, and radio interference detection. Radio monitoring is required for rogue access point detection, interference detection, self-healing, and assisted site re-survey.

Radio monitoring options are configured through the interface at Radio Manager > Radio Monitoring. Both serving and non-serving channels configure access points for radio monitoring. The serving channel is the normal operating channel for the access point. It is the channel on which associated WLAN clients are served. When configured to monitor non-serving channels, the access point periodically jumps off the serving channel to sample a non-serving channel, before resuming normal WLAN client traffic processing. Non-serving channel radio monitoring typically only has a minimal impact on normal WLAN data traffic.

Cisco SWAN framework radio monitoring can also include WLAN clients that support the radio management features. These clients include Cisco Aironet client adapters and WLAN client adapters certified to the version 2 Cisco Compatible Extensions specification. When WLAN client monitoring is

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

36

OL-6217-01

 

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Corporate Headquarters Cisco Aironet 1400 Series Wireless Bridge Deployment Guide N T E N T S Contents Book Title Xxxxx-xx Audience Acroymns and Terms Cisco Swan Framework Overview Cisco Swan Layers Cisco Swan Logical View Shows the access point-based WDS solution Cisco Swan Framework Components WDS WlccpSoftware Components Hardware ComponentsImplementing the Cisco Swan Framework Common Tasks CiscoSecure ACS NAS Setup Adding Username and Password Credentials CiscoSecure ACS User Setup AAA-apconfig#radius-server local AAA-apconfig-radsrvuser username password passwordCiscoWorks Wlse Snmp Community Entry Screen CiscoWorks Wlse Telnet/SSH Credentials Entry Access Point-Based WDS Solution Configuration Configuring the WDS Access PointWds-apconfig#hostname hostname Wds-apconfig#username username password passwordConfiguring the Infrastructure Access Point Wds-apconfig#wlccp wds priority priority numberWds-apconfig#wlccp wnm ip address wlse ip address Managing the Access Points with the CiscoWorks Wlse Infra-apconfig#hostname hostnameInfra-apconfig#username username password password Infra-apconfig-line#access-class access-list numberSwitch-Based WDS Solution Configuration Validating the ConfigurationConfiguring the Catalyst 6500 Supervisor Wds-ap#show wlccp wds apConfiguring the WDS on the Wlsm Create the Vlan between the supervisor and WlsmWlsmconfig#snmp-server view iso iso included Wlsmconfig#hostname hostnameConfiguring the Infrastructure Access Points Wlsmconfig# wlccp wnm ip address wlse ip addressInfra-apconfig#wlccp ap wds ip address wlsm ip address Validating the Setup Wlsm# show wlccp wds apWlsm# show wlccp wnm status Sup720# show mobility status Mobility apFast Secure Roaming with Cckm When Using Multiple Encryption Types or VLANs Infra-apconfig#interface dot11RadioInfra-apconfig-if#encryption mode ciphers cipher-type Infra-apconfig-if-ssid#authentication network-eap eap-groupConfiguring ACU to use Cckm Click Profile ManagementCisco Swan Radio Management Features Cisco Swan Framework Radio ManagementPreparing to Use Cisco Swan Radio Management Building Tool Pop-Up WindowCisco Swan Radio Management Features Page OL-6217-01
Top Page Image Contents