Cisco Systems OL-6217-01 manual Adding Username and Password Credentials

Page 16

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

Figure 6 CiscoSecure ACS NAS Setup

Step 8 Repeat Steps 2 through 7 for each WDS-host device.

Step 9 Restart the CiscoSecure ACS service by selecting Submit + Restart after completing the tasks through Step 7. Or you can select System Configuration on the left-hand side menu, then Service Control, and then Restart.

Adding Username and Password Credentials

Each infrastructure access point presents a username and password to the WDS when it authenticates. These credentials must be defined on the CiscoSecure ACS and do not have to be unique per infrastructure access point. Most implementations use a single username and password credential pair for all of the infrastructure access points. To add the username and password credentials into the CiscoSecure ACS, follow these steps:

Step 1 Log into the CiscoSecure ACS server.

Step 2 Select User Setup on the left-hand side menu (see Figure 7).

Step 3 Enter a username in the User field, then select Add/Edit (see Figure 7).

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

16	OL-6217-01

Image 16

Contents Corporate Headquarters Cisco Aironet 1400 Series Wireless Bridge Deployment Guide N T E N T S Contents Book Title Xxxxx-xx Audience Acroymns and Terms Cisco Swan Framework Overview Cisco Swan Layers Cisco Swan Logical View Shows the access point-based WDS solution Cisco Swan Framework Components WDS WlccpSoftware Components Hardware ComponentsImplementing the Cisco Swan Framework Common Tasks CiscoSecure ACS NAS Setup Adding Username and Password Credentials CiscoSecure ACS User Setup AAA-apconfig#radius-server local AAA-apconfig-radsrvuser username password passwordCiscoWorks Wlse Snmp Community Entry Screen CiscoWorks Wlse Telnet/SSH Credentials Entry Access Point-Based WDS Solution Configuration Configuring the WDS Access PointWds-apconfig#hostname hostname Wds-apconfig#username username password passwordWds-apconfig#wlccp wds priority priority number Configuring the Infrastructure Access PointWds-apconfig#wlccp wnm ip address wlse ip address Managing the Access Points with the CiscoWorks Wlse Infra-apconfig#hostname hostnameInfra-apconfig#username username password password Infra-apconfig-line#access-class access-list numberSwitch-Based WDS Solution Configuration Validating the ConfigurationConfiguring the Catalyst 6500 Supervisor Wds-ap#show wlccp wds apConfiguring the WDS on the Wlsm Create the Vlan between the supervisor and WlsmWlsmconfig#snmp-server view iso iso included Wlsmconfig#hostname hostnameWlsmconfig# wlccp wnm ip address wlse ip address Configuring the Infrastructure Access PointsInfra-apconfig#wlccp ap wds ip address wlsm ip address Wlsm# show wlccp wds ap Validating the SetupWlsm# show wlccp wnm status Sup720# show mobility status Mobility apFast Secure Roaming with Cckm When Using Multiple Encryption Types or VLANs Infra-apconfig#interface dot11RadioInfra-apconfig-if#encryption mode ciphers cipher-type Infra-apconfig-if-ssid#authentication network-eap eap-groupConfiguring ACU to use Cckm Click Profile ManagementCisco Swan Radio Management Features Cisco Swan Framework Radio ManagementPreparing to Use Cisco Swan Radio Management Building Tool Pop-Up WindowCisco Swan Radio Management Features Page OL-6217-01