Cisco Systems OL-6217-01 manual CiscoSecure ACS User Setup

Page 17

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

Figure 7 CiscoSecure ACS User Setup

Step 4 Fill out the information relevant to the user, including the password, and then click Submit (see Figure 8).

Figure 8 CiscoSecure ACS User Setup

Step 5 Repeat Steps 2 through 4 for each credentials pair you intend on using for infrastructure authentication.

The CiscoSecure ACS setup for infrastructure access point authentication is now complete.

Configuring the Local RADIUS Server on the Access Point for Infrastructure Authentication

In environments where the AAA infrastructure does not support Cisco LEAP, the local RADIUS server on an access point must be used for infrastructure authentication of access points. This section covers the steps required to configure the local RADIUS server on an access point.

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

	OL-6217-01	17

Image 17

Contents Corporate Headquarters Cisco Aironet 1400 Series Wireless Bridge Deployment Guide N T E N T S Contents Book Title Xxxxx-xx Audience Acroymns and Terms Cisco Swan Framework Overview Cisco Swan Layers Cisco Swan Logical View Shows the access point-based WDS solution WDS Wlccp Cisco Swan Framework ComponentsHardware Components Software ComponentsImplementing the Cisco Swan Framework Common Tasks CiscoSecure ACS NAS Setup Adding Username and Password Credentials CiscoSecure ACS User Setup AAA-apconfig-radsrvuser username password password AAA-apconfig#radius-server localCiscoWorks Wlse Snmp Community Entry Screen CiscoWorks Wlse Telnet/SSH Credentials Entry Configuring the WDS Access Point Access Point-Based WDS Solution ConfigurationWds-apconfig#username username password password Wds-apconfig#hostname hostnameWds-apconfig#wlccp wnm ip address wlse ip address Configuring the Infrastructure Access PointWds-apconfig#wlccp wds priority priority number Infra-apconfig#hostname hostname Managing the Access Points with the CiscoWorks WlseInfra-apconfig#username username password password Infra-apconfig-line#access-class access-list numberValidating the Configuration Switch-Based WDS Solution ConfigurationConfiguring the Catalyst 6500 Supervisor Wds-ap#show wlccp wds apCreate the Vlan between the supervisor and Wlsm Configuring the WDS on the WlsmWlsmconfig#hostname hostname Wlsmconfig#snmp-server view iso iso includedInfra-apconfig#wlccp ap wds ip address wlsm ip address Configuring the Infrastructure Access PointsWlsmconfig# wlccp wnm ip address wlse ip address Wlsm# show wlccp wnm status Validating the SetupWlsm# show wlccp wds ap Mobility ap Sup720# show mobility statusFast Secure Roaming with Cckm Infra-apconfig#interface dot11Radio When Using Multiple Encryption Types or VLANsInfra-apconfig-if#encryption mode ciphers cipher-type Infra-apconfig-if-ssid#authentication network-eap eap-groupClick Profile Management Configuring ACU to use CckmCisco Swan Framework Radio Management Cisco Swan Radio Management FeaturesBuilding Tool Pop-Up Window Preparing to Use Cisco Swan Radio ManagementCisco Swan Radio Management Features Page OL-6217-01