Voice Gateway with Router
Interactive Voice Response Menu
Action | Command | Choices | Description |
| (press these |
|
|
| keys on the |
|
|
| telephone) |
|
|
|
|
|
|
Set the Mode | 201 | Press 0 to select the | If the Voice Gateway acts as the router for |
|
| router/NAT mode. | your network, use the router/NAT mode. |
|
| Press 1 to select the |
|
|
| bridge/switch mode. | If your network already has a router, use the |
|
|
| bridge/switch mode. |
|
|
|
|
Enable/Disable WAN | 7932 | Press 1 to enable. | Use this setting to enable or disable WAN |
Access to the |
| Press 0 to disable. | access to the |
|
| lets you configure the Voice Gateway.) | |
|
|
|
|
Manual Reboot | 732668 |
| After you hear, “Option successful,” hang up |
|
|
| the phone. The Voice Gateway will |
|
|
| automatically reboot. |
|
|
|
|
Factory Reset | 73738 | Press 1 to confirm. | If necessary, enter the password. The Voice |
|
| Press * (star) to cancel. | Gateway will request confirmation; enter 1 to |
|
|
| confirm. You will hear, “Option successful.” |
|
|
| Hang up the phone. The Voice Gateway will |
|
|
| reboot, and all settings will be reset to their |
|
|
| factory default settings. |
|
|
|
|
NOTE: This feature may be protected by a password available only from your ITSP.
If you need to enter a password, refer to the following section, “Entering a Password.”
18 | Chapter 5: Using the Interactive Voice Response Menu |
| Using the Interactive Voice Response Menu |