Cisco Systems SPA3102 For Windows 98 and Millennium, Need to set a static IP address on a PC

Voice Gateway with Router

C.Click Tools. Click Internet Options. Click the Security tab. Click the Default level button. Make sure the security level is Medium or lower. Then click the OK button.

3.I need to set a static IP address on a PC.

The Voice Gateway, by default, assigns an IP address range of 192.168.0.100 to 192.168.0.150 using the DHCP server on the Voice Gateway. To set a static IP address, you can only use the ranges 192.168.0.2 to 192.168.0.99 and 192.168.0.151 to 192.168.0.254. Each PC or network device that uses TCP/IP must have a unique address to identify itself in a network. If the IP address is not unique to a network, Windows will generate an IP conflict error message. You can assign a static IP address to a PC by performing the following steps:

For Windows 98 and Millennium:

A.	Click Start, Setting, and Control Panel. Double-click Network.
B.	In The following network components are installed box, select the TCP/IP-> associated with your
	Ethernet adapter. If you only have one Ethernet adapter installed, you will only see one TCP/IP line with
	no association to an Ethernet adapter. Highlight it and click the Properties button.
C.	In the TCP/IP properties window, select the IP address tab, and select Specify an IP address. Enter a
	unique IP address that is not used by any other computer on the network connected to the Voice
	Gateway. You can only use an IP address in the ranges 192.168.0.2 to 192.168.0.99 and 192.168.0.151
	to 192.168.0.254. Make sure that each IP address is unique for each PC or network device.
D.	Click the Voice Gateway tab, and in the New Voice Gateway prompt, enter 192.168.0.1, which is the
	default IP address of the Voice Gateway. Click the Add button to accept the entry.
E.	Click the DNS tab, and make sure the DNS Enabled option is selected. Enter the Host and Domain
	names (e.g., John for Host and home for Domain). Enter the DNS entry provided by your ISP. If your ISP
	has not provided the DNS IP address, contact your ISP to get that information or go to its website for the
	information.
F.	Click the OK button in the TCP/IP properties window, and click Close or OK for the Network window.
G.	Restart the computer when asked.
50	Appendix A: Troubleshooting
	Common Problems and Solutions