Cisco Systems SOHO 77 manual Router to Device Network Device Ethernet Cable, Button, Out Mdi-X

Chapter 2 Installation

Installing the Router

Table 2-3lists the Ethernet devices you can connect to Cisco 827H and SOHO 77H routers, the connections for each device, and the settings of the router TO HUB/TO PC button (the default setting is IN).

Table 2-3 Ethernet Device Connections for Cisco 827H and SOHO 77H Routers

				Network
			Router TO	Device
Network Device		Ethernet Cable	HUB/TO PC	Button
Connected to Router	Router Port	Type1	Button Setting	Setting2
Hub with equivalent to	ETHERNET port 4	Straight-through	IN	MDI (IN)
router TO HUB/TO PC
button
Hub with equivalent to	ETHERNET port 4	Straight-through	OUT	MDI-X
router TO HUB/TO PC				(OUT)
button
Hub without equivalent	ETHERNET port 4	Straight-through	OUT	MDI-X
to router TO HUB/TO				(OUT)
PC button
Server, PC, or	ETHERNET port 4	Straight-through	OUT	–
workstation
Hub with equivalent to	ETHERNET port 1, 2, 3	Crossover	N/A	MDI (IN)
router TO HUB/TO PC
button
Hub with equivalent to	ETHERNET port 1, 2, 3	Straight-through	N/A	MDI-X
router TO HUB/TO PC				(OUT)
button
Hub without equivalent	ETHERNET port 1, 2, 3	Crossover	N/A	MDI-X
to router TO HUB/TO				(OUT)
PC button
Server, PC, or	ETHERNET port 1, 2, 3	Straight-through	N/A	–
workstation

1.Cisco provides a yellow straight-through cable. You provide crossover or additional straight-through cables. For cable specifications, see Appendix A, “Specifications and Cables.”

2.Hub vendors choose different names for the button that controls the cable selection. This table uses the

Cisco 1528 Micro Hub 10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your particular hub. See your hub documentation for details.

Cisco 827 and SOHO 77 Routers Hardware Installation Guide

2-8 78-6854-03