Cisco Systems SOHO 77 manual Installation Configuring the Router

Page 37

Chapter 2 Installation

Configuring the Router

Tip If the CRWS home page does not appear when you enter the URL http://10.10.10.1, test the connection between the PC and the router by doing the following:

1.Check that the OK LED on the router is on, and check the cable connection between the router and the PC. Be sure that the TO HUB/TO PC button is in the correct position. The button is in the correct position if the LED for the port on the front of the router is on.

2.If the CRWS home page still does not appear, verify that the web browser’s “work offline” option is disabled.

3.If the web page still does not appear, verify that your PC is automatically configured to receive an IP address. Follow the instructions in the Cisco Router Web Setup Troubleshooting Guide, which is available on the Cisco 800 and SOHO Series Product Documentation CD.

4.If the PC is configured to automatically receive an IP address, but the web page still does not appear, select Start/Run, type winipcfg in the Run window, and examine the address in the IP address field. The address should be in the format 10.10.10.X, in which X is a number that is equal or greater than 2; for example, 10.10.10.2, or 10.10.10.3. If the IP address is not in this format, verify that an Ethernet adapter name is visible in the Adapter field. If there is no name in the field, return to Step 3 in “Checking the PC Configuration," add TCP to the list of protocols. Then return to “Using Cisco Router Web Setup to Configure the Router, page 2-16," and complete the procedure.

Step 4 If you have no special configuration requirements, click the Router Setup link on the home page, and then click Easy Setup. (This may appear as Quick Setup on some models.) Then, enter the user name and password provided to you by your Internet service provider, and click Apply.

Step 5 If you need to configure special features such as Network Address Translation (NAT), click the appropriate links on the home page, and complete the configuration screens.

Step 6 Click the Password link on the home page, and set a password for the router.

Step 7 Click the Test Connection link on the home page, and allow the connection to be tested.

Step 8 Select Start/Run, and type winipcfg in the Open field of the Run window. When the IP Config window appears, click Release to release the PC’s IP address. Then click Renew to renew the PC’s IP address.

Alternatively, open the Run window and enter ipconfig /release to release the PC’s IP address.Then enter ipconfig /renew to renew the IP address of the PC.

Step 9 Open a web browser on the PC, and connect to a website.

The router installation is complete when you have connected to a website.

Cisco 827 and SOHO 77 Routers Hardware Installation Guide

 

78-6854-03

2-17

 

 

 

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Corporate Headquarters Cisco 827 and Soho 77 Routers Hardware Installation GuideCisco 827 and Soho 77 Routers Hardware Installation Guide Preface Using the Router LEDs to Check Links Organization AudienceConventions Preface Conventions Obtaining Documentation Related DocumentationCisco.com Documentation DVDCisco Product Security Overview Documentation FeedbackOrdering Documentation Obtaining Technical Assistance Reporting Security Problems in Cisco ProductsCisco Technical Support Website Definitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information Xii Product Overview Feature Routers Description FeaturesRouter Overview Router Ethernet Ports Telephone Ports Front PanelsCable lock Ethernet port Adsl port Back Panels9and -10show the back panels of the Soho 77 routers Color Function LEDsOK LED Adsl RXD Adsl CDAdsl TXD EthernetPage Installation Safety Preparing for InstallationPreventing Electrostatic Discharge Damage Unpacking the BoxPreventing Router Damage Mounting on a Table Mounting the RouterMounting on a Wall Mounting Router on a Wall Installing the RouterMDI Connect Ethernet DevicesOUT MDI-X OUT OUTRouter to Device Network Device Ethernet Cable NetworkButton OUT MDI-XConnecting Hubs Connecting a Server, PC, or Workstation Connect an Adsl Line Connecting an Adsl Line to a Wall JackConnecting an Analog Telephone or Fax Machine Vendor Name Product Name For More Information Connecting a Terminal or PCConnect the AC Adapter To power supplyPower/Link LEDs to Check Normal Patterns Using the Router LEDs to Check LinksEthernet 1, Ethernet Phone 1, PhoneChecking the PC Configuration Configuring the RouterUsing Cisco Router Web Setup to Configure the Router Installation Configuring the Router Page Before You Call Your Cisco Reseller Problems During First StartupSolutions SymptomHUB/TO PC Problems After Router Is Running Page Description Design Specification Physical Dimensions System SpecificationsRouter Power Cisco 827H and Soho 77H Environmental Operating RangesDescription Design Specification Telephone Port Power Cisco Port Connector PinoutsFunction To HUB/TO PC Button Pin Position OUT Position TX+ RX+Pin Function Unused Ethernet Cable Specifications Cabling SpecificationsROF RTNType Category Shielding Maximum Cable Distances10BASE-T Cable Maximum DistanceEthernet RXD LED Ethernet TXD LED NumericsIN-2 IN-3 IN-4
Top Page Image Contents