Chapter 2 Installation
Installing the Router
Connecting a Server, PC, or Workstation
Before connecting a server, PC, or workstation to the router, see Table
To connect a server, PC, or workstation to the router, follow the steps in Figure
Figure 2-4 Connecting a Server, PC, or Workstation to the Router
1.Set TO HUB/TO PC button.
Cisco 827,
and SOHO 77
TO HUB | ETHERNET | CONSOLE |
| M | odel Cisco | |
TO PC |
| ADSL |
|
1 |
| PHONE | |
|
|
| |
4 | 3 | 2 | 1 |
|
|
2.Connect yellow cable to ETHERNET 4 port
on router.
1.Set TO HUB/TO PC button.
Cisco 827H and
SOHO 77H
TO HUB | ETHERNET 10BASET | Cisco 827 |
|
|
TO PC | H |
| ||
|
| CONSOLE |
| |
| 4 |
| ADSL | +5 VDC |
| 3 |
|
| |
| 2 | 1 |
|
|
|
|
|
|
2.Connect yellow cable to ETHERNET 4 port
on router.
PC
74116
3.Connect other end of cable to server, PC, or workstation.
To verify the connection, check that the Ethernet 1 LED is on after you complete the router installation.
Cisco 827 and SOHO 77 Routers Hardware Installation Guide
| ||
|