Billion Electric Company manual Billion Bipac 7100SG Adsl Modem/Router

Page 10

Billion BIPAC 7100SG ADSL Modem/Router

verify that the PWR, SYS, LAN LNK and ADSL SYN LEDs are lit. If they are not, verify that you are using the proper cables.

So long as the cables are connected and the LEDs are lit normally, follow section “3.2 Configuring the Network Properties” below to modify the network settings.

Since the product cannot auto-detect whether your cable is correct or not, please make sure you are using the right cable to a PC or a Hub.

Image 10

Contents Bipac 7100SG Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SGPackage Contents Bipac 7100SG Features Bipac 7100SG Application IntroductionLit green when the LAN1 link is connected Lit green when power adapter is connectedFlashes when sending/receiving data Front LEDsPort Rear PortsCabling MeaningBillion Bipac 7100SG Adsl Modem/Router Before Configuration Configuring PC in Windows XPClick OK to finish the configuration Configuring PC in Windows Configuring PC in Windows 95/98/ME Then select the DNS Configuration Factory Default Settings Configuring PC in Windows NT4.0Password Information from ISPConfiguring with Web Browser Status Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP StatusStatus- VPN Connect Status Status- Learned MAC TableRouting Table System Log Security LogsQuick Start Configuration 3.1 WANConfiguration ATM 3.2 LAN Device IP AddressWireless Basic settingAdvanced setting Wlan SecurityPassword SystemTime Zone Upgrade Factory Setting Restart FirewallPacket Filter Configuration MAC Filtering Intrusion Detection Block WAN Request URL Blocking VPN Virtual Private Networks Configuration Virtual Server Advanced Adsl3.8.2 DNS Dynamic DNS 3.8.4 NAT Configuration 3.8.5 RIP Snmp Static Routing Configuration Misc Configuration Diagnostic Test Checking LAN ConnectionTest Internet connection Save Config Chapter Troubleshooting Appendix