Billion Electric Company 7100SG manual Intrusion Detection

Page 41

Chapter 3 Configuration

Src MAC: Enter the source MAC address.

Dest MAC: Enter the destination MAC address.

Type: Enter the Ethernet type.

Block Forward: Check Block if you want to block requests from the source MAC address sending to the destination MAC address. Check Forward if you want to forward requests from the source MAC address sending to the destination MAC address.

3.4.3.5.3 Intrusion Detection

Check “Enable” if you want to detect invader sneak in your computer without permitted .The ADSL Router can automatically detect and block the DoS (Denial of Service) attack if user enables this function. This kind of attack is not to achieve the confidential data of this network; instead, it aims to crush specific equipment or the entire network. If this happens, the users will not be able to access the network resources. There are few samples of hacker patterns implemented as below.

-IP Spoofing

-Ping of Death (Length > 65535)

-Land Attack (Same source / destination IP address)

-IP with zero length

-Sync flooding

-Smurf Attack (ICMP Echo with x.x.x.0 or x.x.x.255)

-Snork Attack

-UDP port loop-back

-TCP NULL scan

37

Image 41
Contents Bipac 7100SG Page Table of Contents Appendix An Overview of Bipac 7100SG Chapter IntroductionBipac 7100SG Features Package ContentsIntroduction Bipac 7100SG ApplicationFlashes when sending/receiving data Lit green when power adapter is connectedLit green when the LAN1 link is connected Front LEDsCabling Rear PortsPort MeaningBillion Bipac 7100SG Adsl Modem/Router Configuring PC in Windows XP Before ConfigurationClick OK to finish the configuration Configuring PC in Windows Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default SettingsInformation from ISP PasswordConfiguring with Web Browser Status Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP Status Status- PPP StatusStatus- Learned MAC Table Status- VPN Connect StatusRouting Table Security Logs System LogQuick Start 3.1 WAN ConfigurationConfiguration ATM Device IP Address 3.2 LANBasic setting WirelessWlan Security Advanced settingSystem PasswordTime Zone Upgrade Factory Setting Packet Filter FirewallRestart Configuration MAC Filtering Intrusion Detection Block WAN Request URL Blocking VPN Virtual Private Networks Configuration Virtual Server Adsl Advanced3.8.2 DNS Dynamic DNS 3.8.4 NAT Configuration 3.8.5 RIP Snmp Static Routing Configuration Misc Configuration Checking LAN Connection Diagnostic TestTest Internet connection Save Config Chapter Troubleshooting Appendix