Billion Electric Company 7100SG manual Configuring with Web Browser

Page 18

Billion BIPAC 7100SG ADSL Modem/Router

PPPoE

PPPoA

RFC1483 Bridged

RFC1483 Routed

IPoA

VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, Service

Name, and Domain Name System (DNS) IP address (it can be

automatically assigned by your ISP when you connect or be set manually).

VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, and

Domain Name System (DNS) IP address (it can be automatically assigned

by your ISP when you connect or be set manually).

VPI/VCI, VC-based/LLC-based multiplexing to use Bridged Mode.

VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet mask,

Gateway address, and Domain Name System (DNS) IP address (it is fixed

IP address).

VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet mask,

Gateway address, and Domain Name System (DNS) IP address (it is fixed

IP address).

3.4 Configuring with Web Browser

The ADSL Modem/Router can be configured with your Web browser. The web browser is included as a standard application in following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me/XP, etc. The product provides a very easy and user-friendly interface for configuration.

Open the web browser, enter the local port IP address of the ADSL Router, which default at 192.168.1.254, and click “Go” to get the login page.

There are two levels of password protection. The first level is for administrator and the second one is for user.

14

Image 18
Contents Bipac 7100SG Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SGPackage Contents Bipac 7100SG FeaturesBipac 7100SG Application IntroductionLit green when the LAN1 link is connected Lit green when power adapter is connectedFlashes when sending/receiving data Front LEDsPort Rear PortsCabling MeaningBillion Bipac 7100SG Adsl Modem/Router Before Configuration Configuring PC in Windows XPClick OK to finish the configuration Configuring PC in Windows Configuring PC in Windows 95/98/ME Then select the DNS Configuration Factory Default Settings Configuring PC in Windows NT4.0Password Information from ISPConfiguring with Web Browser Status Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP StatusStatus- VPN Connect Status Status- Learned MAC TableRouting Table System Log Security LogsQuick Start Configuration 3.1 WANConfiguration ATM 3.2 LAN Device IP AddressWireless Basic settingAdvanced setting Wlan SecurityPassword SystemTime Zone Upgrade Factory Setting Firewall RestartPacket Filter Configuration MAC Filtering Intrusion Detection Block WAN Request URL Blocking VPN Virtual Private Networks Configuration Virtual Server Advanced Adsl3.8.2 DNS Dynamic DNS 3.8.4 NAT Configuration 3.8.5 RIP Snmp Static Routing Configuration Misc Configuration Diagnostic Test Checking LAN ConnectionTest Internet connection Save Config Chapter Troubleshooting Appendix