Billion Electric Company 7100SG manual Test Internet connection

Page 58

Billion BIPAC 7100SG ADSL Modem/Router

This test sends ATM OAM F5 Segment loop back request cells to the central office equipments through your DSL connection. This test will pass if response cell is received. Since your service provider might not support this test, your DSL modem could still work even if this test fails.

If this test fails consistently and your DSL modem seems not working, check to make sure the VPI and VCI are configured correctly.

This test returns FAIL if the DSL synchronization test failed.

Test ATM OAM End-to-End Loop Back

This test sends ATM OAM F5 End-to-End loop back request cells to the central office equipments through your DSL connection. This test returns PASS if response cell is received. Since your service provider might not support this test, your DSL modem could still work even if this test fails.

If this test return FAIL consistently and your DSL modem seems not working, check to make sure the VPI and VCI are configured correctly.

This test returns SKIPPED if the DSL synchronization test failed.

Test Ethernet connect to ATM

This test returns PASS if the ATM AAL5 module is loaded correctly in your DSL modem. If this test returns FAIL, an internal error has occurred.

This test returns SKIPPED if the DSL synchronization does not return PASS.

Test IP connect to PPP

This test returns PASS if your DSL modem has been assigned a valid IP address by your service provider through DHCP or your DSL modem is assigned a valid IP address statically.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test returns FAIL consistently and DHCP client is turned on in your DSL modem, check with your service provider. If this test returns FAIL consistently and your DSL modem is statically assigned an IP address, make sure the IP address is the correct one assigned by your service provider.

This test returns SKIPPED if “Ethernet connect to AAL5” test does not return PASS.

Test Internet connection

This test returns PASS if the gateway can be reached through ping request. The gateway is assigned by your service provider, or obtained from your service provider by PPP negotiation or DHCP negotiation.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test returns FAIL consistently and your DSL modem seems not working, check to make sure your statically assigned IP address is configured correctly or DHCP client is turned on with the current VC.

This test returns SKIPPED if "IP connect to PPP" or "IP connect to Ethernet" test does not return PASS.

54

Image 58
Contents Bipac 7100SG Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SGPackage Contents Bipac 7100SG FeaturesBipac 7100SG Application IntroductionLit green when the LAN1 link is connected Lit green when power adapter is connectedFlashes when sending/receiving data Front LEDsPort Rear PortsCabling MeaningBillion Bipac 7100SG Adsl Modem/Router Before Configuration Configuring PC in Windows XPClick OK to finish the configuration Configuring PC in Windows Configuring PC in Windows 95/98/ME Then select the DNS Configuration Factory Default Settings Configuring PC in Windows NT4.0Password Information from ISPConfiguring with Web Browser Status Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP StatusStatus- VPN Connect Status Status- Learned MAC TableRouting Table System Log Security LogsQuick Start Configuration 3.1 WANConfiguration ATM 3.2 LAN Device IP AddressWireless Basic settingAdvanced setting Wlan SecurityPassword SystemTime Zone Upgrade Factory Setting Restart FirewallPacket Filter Configuration MAC Filtering Intrusion Detection Block WAN Request URL Blocking VPN Virtual Private Networks Configuration Virtual Server Advanced Adsl3.8.2 DNS Dynamic DNS 3.8.4 NAT Configuration 3.8.5 RIP Snmp Static Routing Configuration Misc Configuration Diagnostic Test Checking LAN ConnectionTest Internet connection Save Config Chapter Troubleshooting Appendix