Cisco Systems VG224 installation instructions Voice Cables, Color or Type Connected To Cable

Chapter 3 Installing the Cisco VG224 Voice Gateway

Connecting Cables

Voice Cables

Warning For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection. FXS/T3/E3 Statement 1044

Warning This equipment contains a ring signal generator (ringer), which is a source of hazardous voltage. Do not touch the RJ-11 (phone) port wires (conductors), the conductors of a cable connected to the RJ-11 port, or the associated circuit-board when the ringer is active. The ringer is activated by an incoming call. Statement 1042

The analog FXS voice cables and connections are:

Color or Type	Connected To	Cable
RJ-21	Distribution panel	RJ-21-to-RJ-21 straight-through cable (not included)

Figure 3-13 WAN and Voice Connections

Distribution panel

1

Cisco VG224

95921

2

Network

demarcation

1

RJ-21 cable

2

RJ-45 cable (through a patch panel) to central office

Cisco VG224 Voice Gateway Hardware Installation Guide

3-18 OL-5006-04