Cisco Systems VG224 Safety Recommendations, Maintaining Safety with Electricity, Safety Tips

Page 2

Chapter 3 Installing the Cisco VG224 Voice Gateway

Safety Recommendations

Safety Recommendations

The following information is included to alert you to safety recommendations and best practices when working with this equipment.

Maintaining Safety with Electricity

Follow these guidelines when working on equipment powered by electricity.

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001

Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029

General Safety Practices

Follow these guidelines to ensure personal safety and protect the equipment:

Keep the chassis area clear and dust-free during and after installation.

Put the removed chassis cover in a safe place.

Keep tools away from walk areas where you and others could fall over them.

Do not wear loose clothing that could get caught in the chassis.

Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

Warning This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260. Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The telecommunications lines must be disconnected 1) before unplugging the main power connector or 2) while the housing is open, or both. Statement 1043

Safety Tips

Use these tips as safety guidelines when installing or working around this equipment.

Locate the emergency power-off switch for the room in which you are working. Then, if an electrical accident occurs, you can act quickly to turn off the power.

Disconnect all power before installing or removing a chassis.

Do not work alone if potentially hazardous conditions exist.

Never assume that power is disconnected from a circuit. Always check.

Cisco VG224 Voice Gateway Hardware Installation Guide

3-2

OL-5006-04

 

 

Image 2
Contents Installing the Cisco VG224 Voice Gateway General Safety Practices Safety RecommendationsMaintaining Safety with Electricity Safety TipsSite Log Preventing Electrostatic Discharge DamageKeeping Track-Checklist Installation ChecklistMounting Tools and Equipment Unpacking and InspectionRack-mounting Wall-mounting Rack-Mounting the ChassisMounting Screws 19-Inch Rack Installation-Front Panel Forward Attaching the BracketsInstalling the Cisco VG224 Voice Gateway in a Rack StatementWall-Mounting the Chassis Attaching the Brackets for Wall-Mounting8shows the orientation required for installation Bench-Top Installation Installing the Ground ConnectionCrimping a Ground Lug onto the Ground Wire 10 NEBS-Compliant Chassis Ground Connection Using Ground Lug Nebs Tests Results Connecting Cables120 VAC, 15A 240 VAC, 10A international Statement LAN and Power Cables Connected To CableConnecting the Input Power Connecting the Console Port to a PC or an Ascii TerminalConnecting the Auxiliary Port to a Modem Voice Cables Color or Type Connected To Cable14 Analog Voice Connection Connecting to a Remote PC Ports, Connectors, and PinoutsConnecting to a Modem Cisco VG224 Port Port Color Connector/Cable Interface ToConnecting a Backup Battery to a DC-Powered Cisco VG224 Connecting Backup PowerConnecting to a Remote Ascii Terminal 15 Connecting a Battery Backup to a DC-Powered Cisco VG224 Pin Number DescriptionsConnecting a UPS to an AC-Powered Cisco VG224 UPSOL-5006-04
Related manuals
Manual 66 pages 62.14 Kb

VG224 specifications

The Cisco Systems VG224 is a versatile VoIP (Voice over Internet Protocol) gateway designed to facilitate the integration of traditional phone systems with modern IP-based communications. This device plays a crucial role in providing connectivity between analog phones and digital networks, allowing organizations to transition smoothly from legacy telephony systems to IP telephony.

One of the standout features of the VG224 is its ability to support up to 24 analog phone lines. This scalability makes it an ideal choice for small to medium-sized businesses that require a dependable solution to handle their telephony needs without overspending on infrastructure. The VG224 acts as a bridge, converting analog voice signals into digital IP packets, thus enabling seamless communication over the Internet or intranets.

The VG224 is equipped with a range of technologies that enhance its functionality and reliability. Voice activity detection (VAD), comfort noise generation (CNG), and echo cancellation are just some examples of the advanced audio processing techniques integrated into the VG224. These technologies improve call quality by ensuring clear and uninterrupted conversations, even under varying network conditions.

In terms of characteristics, the VG224 features a user-friendly interface with a web-based management console, making it easy for network administrators to configure and manage the device remotely. This streamlined approach to management is crucial for businesses that require quick adjustments to their communication infrastructure without the need for extensive technical knowledge.

The VG224 supports multiple signaling protocols, including H.323, MGCP (Media Gateway Control Protocol), and SIP (Session Initiation Protocol). This flexibility allows it to integrate seamlessly with various IP telephony systems and offers businesses the option to utilize their preferred communication standards. Additionally, the device supports power over Ethernet (PoE), providing the convenience of powering devices through the same cable used for data connectivity, thus reducing the need for additional power sources.

In conclusion, the Cisco Systems VG224 is a robust VoIP gateway that combines advanced technology with user-friendly features. Its capacity to support up to 24 analog lines, along with its compatibility with various signaling protocols, makes it an excellent choice for businesses looking to modernize their telecommunication systems while maintaining the reliability of traditional analog connections. With its ease of management and high-quality voice processing capabilities, the VG224 stands out as a key asset for any organization aiming to optimize its communication infrastructure.