Chapter 3 Installing the Cisco VG224 Voice Gateway
Mounting Tools and Equipment
Mounting Tools and Equipment
Obtain the following tools and parts to install a Cisco VG224 voice gateway:
•Standard
•Phillips screwdriver for attaching brackets to a Cisco VG224 voice gateway
•Mounting brackets and screws for
–Four telco machine screws, for installing the chassis in a rack (use the screw size required by the rack)
•Screws and anchors for
–Eight wood screws or other fasteners, for installing the chassis on a wall. An additional starter screw can be used to facilitate
•
In addition, you might need the following external equipment:
•Console terminal, or personal computer with terminal emulation software
•PC running terminal emulation software for administrative access
•Modem for remote access
•Analog voice
•Ethernet switch
•Modem for remote configuration
Unpacking and Inspection
Do not unpack the Cisco VG224 until you are ready to install it. If the installation site is not ready, keep the chassis in its shipping container to prevent accidental damage.
The Cisco VG224, cables, printed publications, and any optional equipment you ordered might be shipped in more than one container. When you unpack each shipping container, check the packing list to ensure that you received all the following items:
•Cisco VG224
•Power cord,
•
•
•
•Chassis guard for
•Grounding lug and fasteners
•Cisco VG224 Voice Gateway Quick Start Guide
•Cisco VG224 Voice Gateway Regulatory Compliance and Safety Information
Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when installing or configuring your system, contact a customer service representative. (See the “Obtaining Technical Assistance” section on page xvi.)
Cisco VG224 Voice Gateway Hardware Installation Guide
|
| ||
|
|