Cisco Systems VG224 installation instructions Pin Number Descriptions

Page 22

Chapter 3 Installing the Cisco VG224 Voice Gateway

Connecting Backup Power

Figure 3-15 Connecting a Battery Backup to a DC-Powered Cisco VG224

Cisco VG224 voice gateway

AC wall plug

Battery backup

VG224-24FXS

103120

DC plug

Caution Use a backup battery only if you are not using AC to power your Cisco VG224 voice gateway. Do not use AC and DC power at the same time. If you do, the unit stops operating, and you need to reboot it with only a single power source.

Note We recommend a 12-volt automotive battery if you require longer periods of battery backup (up to 8 hours).

Figure 3-16shows the DC power connector. See Table 3-5for pinout information for the DC power connector on the Cisco VG224 voice gateway.

Table 3-5 Pinouts for DC Power Connector

Pin Number

Descriptions

Pin Number

Descriptions

 

 

 

 

1

GND (input enable)

5

ON_BAT (battery is on)

 

 

 

 

2

+12V (power)

6

+12V (power)

 

 

 

 

3

REP_BAT (replace battery)

7

LOW_BAT (battery is low)

 

 

 

 

4

GND (power return)

8

GND (power return)

 

 

 

 

Figure 3-16 DC Power Connector

VG224-24FXS

103121

Pin 5

Pin 1

Cisco VG224 Voice Gateway Hardware Installation Guide

3-22

OL-5006-04

 

 

Image 22
Contents Installing the Cisco VG224 Voice Gateway General Safety Practices Safety RecommendationsMaintaining Safety with Electricity Safety TipsSite Log Preventing Electrostatic Discharge DamageKeeping Track-Checklist Installation ChecklistMounting Tools and Equipment Unpacking and InspectionMounting Screws Rack-Mounting the ChassisRack-mounting Wall-mounting 19-Inch Rack Installation-Front Panel Forward Attaching the BracketsInstalling the Cisco VG224 Voice Gateway in a Rack StatementWall-Mounting the Chassis Attaching the Brackets for Wall-Mounting8shows the orientation required for installation Bench-Top Installation Installing the Ground ConnectionCrimping a Ground Lug onto the Ground Wire 10 NEBS-Compliant Chassis Ground Connection Using Ground Lug 120 VAC, 15A 240 VAC, 10A international Statement Connecting CablesNebs Tests Results LAN and Power Cables Connected To CableConnecting the Input Power Connecting the Console Port to a PC or an Ascii TerminalConnecting the Auxiliary Port to a Modem Voice Cables Color or Type Connected To Cable14 Analog Voice Connection Connecting to a Remote PC Ports, Connectors, and PinoutsConnecting to a Modem Cisco VG224 Port Port Color Connector/Cable Interface ToConnecting to a Remote Ascii Terminal Connecting Backup PowerConnecting a Backup Battery to a DC-Powered Cisco VG224 15 Connecting a Battery Backup to a DC-Powered Cisco VG224 Pin Number DescriptionsConnecting a UPS to an AC-Powered Cisco VG224 UPSOL-5006-04
Related manuals
Manual 66 pages 62.14 Kb

VG224 specifications

The Cisco Systems VG224 is a versatile VoIP (Voice over Internet Protocol) gateway designed to facilitate the integration of traditional phone systems with modern IP-based communications. This device plays a crucial role in providing connectivity between analog phones and digital networks, allowing organizations to transition smoothly from legacy telephony systems to IP telephony.

One of the standout features of the VG224 is its ability to support up to 24 analog phone lines. This scalability makes it an ideal choice for small to medium-sized businesses that require a dependable solution to handle their telephony needs without overspending on infrastructure. The VG224 acts as a bridge, converting analog voice signals into digital IP packets, thus enabling seamless communication over the Internet or intranets.

The VG224 is equipped with a range of technologies that enhance its functionality and reliability. Voice activity detection (VAD), comfort noise generation (CNG), and echo cancellation are just some examples of the advanced audio processing techniques integrated into the VG224. These technologies improve call quality by ensuring clear and uninterrupted conversations, even under varying network conditions.

In terms of characteristics, the VG224 features a user-friendly interface with a web-based management console, making it easy for network administrators to configure and manage the device remotely. This streamlined approach to management is crucial for businesses that require quick adjustments to their communication infrastructure without the need for extensive technical knowledge.

The VG224 supports multiple signaling protocols, including H.323, MGCP (Media Gateway Control Protocol), and SIP (Session Initiation Protocol). This flexibility allows it to integrate seamlessly with various IP telephony systems and offers businesses the option to utilize their preferred communication standards. Additionally, the device supports power over Ethernet (PoE), providing the convenience of powering devices through the same cable used for data connectivity, thus reducing the need for additional power sources.

In conclusion, the Cisco Systems VG224 is a robust VoIP gateway that combines advanced technology with user-friendly features. Its capacity to support up to 24 analog lines, along with its compatibility with various signaling protocols, makes it an excellent choice for businesses looking to modernize their telecommunication systems while maintaining the reliability of traditional analog connections. With its ease of management and high-quality voice processing capabilities, the VG224 stands out as a key asset for any organization aiming to optimize its communication infrastructure.