Cisco Systems manual Locating Modules, Removing the Cover of the Cisco 1805 Router

Page 4

Chapter 8 Installing and Upgrading Internal Modules in Cisco 1805 Cable Routers

Modules Internal to the Cisco 1805 Cable Router

Figure 8-3 Removing the Cover of the Cisco 1805 Router

2

1

HWICL-E-D-2

CAB

				PWR 0x	LNK
				1x LNK
HWIC			2x	LNK PWR
4ESW	PWR 3x	LNK	PWR

CABLE

DS	LINK
US	POWER

ONLINE

232510

	1	Slide cover back from router chassis	2	Rotate cover to remove from router chassis

Step 7	Place the router bottom on an antistatic mat, and begin installing the memory modules.

Locating Modules

Figure 8-4shows where the connector for the SODIMM or the AIM is located on the Cisco 1805 cable router motherboard.

Cisco 1805 DOCSIS Cable Router Hardware Installation Guide

8-4	OL-14661-01

Image 4

Contents Safety Warnings Modules Internal to the Cisco 1805 Cable Router Opening the ChassisRemoving the Chassis Screw Locating Modules Removing the Cover of the Cisco 1805 RouterInstalling a Sodimm Cisco 1805 Cable Router Internal ViewInstalling an AIM Removing a SodimmAccessory Kit to Use Plastic Standoff Orientation Connecting the AIM to the System Board Closing the Chassis Applying the AIM LabelRotate cover onto router Slide cover onto router chassis OL-14661-01