Cisco Systems 1805 manual Installing an AIM, Removing a Sodimm

Chapter 8 Installing and Upgrading Internal Modules in Cisco 1805 Cable Routers

Modules Internal to the Cisco 1805 Cable Router

Figure 8-5 Removing a SODIMM

1

2

103155

1

Spring-loaded clips

2

SODIMM

Step 3 Insert the SODIMM into the SODIMM socket, as shown in Figure 8-6.

Figure 8-6 Installing a SODIMM

1

2

103154

1

SODIMM

2

Insert and rotate into socket.

Step 4 Firmly press the SODIMM into the socket until the spring-loaded clips on the socket snap over the end of the SODIMM.

Installing an AIM

The Cisco 1805 cable router has the capability to support a single AIM module. To install an AIM, follow the procedure given here.

Cisco 1805 DOCSIS Cable Router Hardware Installation Guide

8-6 OL-14661-01