Cisco Systems 12006 series, 12406 series manual Product Overview Product Description

Page 5

Chapter 1 Product Overview

Product Description

All power modules and other field replaceable units (FRUs), except for the air blower module and the power distribution unit (PDU), can be removed from the front of the chassis.

All source power connections are located at the rear of the chassis on the PDU. (See Figure 1-2.)

Enhanced models have a new stylish front door that hides router cabling. The door can be installed to open from the right side or left side to give you total flexibility.

Network Equipment Building Systems—Cisco 12006 and Cisco 12406 routers comply with the Network Equipment Building System (NEBS) Criteria Level 3 requirements defined in SR-3580 for flammability, structural, and electronics compliance.

Electromagnetic Compatibility and Electrostatic Discharge Compliant— Cisco 12006 and Cisco 12406 routers comply with emissions, immunity, and electrostatic discharge (ESD) standards for both product and packaging.

Bonding and Grounding—Bonding and grounding for safety, circuit protection, noise currents, reliability, and operations compliance.

Environmental Monitoring—Cisco 12006 and Cisco 12406 router complies with environmental monitoring standards for operating temperature and humidity, as well as handling temperature and humidity (except for heat dissipation).

Shock and Vibration—Cisco 12006 and Cisco 12406 routers have been shock- and vibration-tested for operating ranges, handling, and earthquake standards to NEBS (Zone 4 per GR-63-Core). These tests have been conducted in earthquake environment and criteria, office vibration and criteria, transportation vibration and criteria, and packaged equipment shock criteria.

 

 

Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide

 

 

 

 

 

 

OL-11497-03

 

 

1-5

 

 

 

Image 5
Contents Introduction Product OverviewProduct Description Cisco 12006 and Cisco 12406 router Front View Product Overview Product Description Product Overview Product Description Cisco 12006 and Cisco 12406 router Rear View RP and Line Card Slots Physical and Functional DescriptionChassis Chassis Backplane Switch Fabric Card SlotsAlarm Card Slots Cooling PowerSwitch Fabric Card Types Multigigabit Crossbar Switch FabricNonredundant and Redundant System Configurations Switch Fabric Redundancy Switch Fabric Switching Capacity and Router TypeDevice Discovery Maintenance BusPower-Up/Down Control Code Download DiagnosticsEnvironmental Monitoring and Alarms Route Processor Functions Route ProcessorsGigabit Route Processor Route Processor TypesProduct Overview Route Processors GRP Layout Type Size Quantity Description Location GRP Memory ComponentsSram System Status LEDs Reset AUX Coll RX Link MIIGRP Alphanumeric LED Displays Partial Faceplate Soft Reset SwitchAsynchronous Serial Ports Pcmcia SlotsEthernet Port Performance Route Processor Front View Performance Route ProcessorProduct Overview Route Processors PRP Horizontal Orientation Sdram PRP Memory ComponentsSdram Flash Disk Size Product Number Soft Reset Switch Ethernet Ports Flash Disk SlotsLine Cards 10 Sample Line Cards Alarm Alarm CardsAlarm Card Status Alarm Output FunctionClock and Scheduler Card and Switch Fabric Card Status Alarm Relay Contact Connector Power SubsystemsPower Source Monitoring AC PDU AC Power Subsystem12 AC Power Distribution Unit 13 AC-Input Power Supply AC-Input Power SupplyProduct Overview Power Subsystems LED Label Function State Description DC Power Subsystem14 DC Power Distribution Unit DC-Input Power Entry Module Power a16 DC-Input Power Entry Module LED Label Color Function Blower Module Power DistributionTop view 18 Air Filter Locations Air FiltersCable-Management System 19 Chassis Cable-Management System Field-Replaceable Units Technical Specifications