Emulex 110 manual Updating Firmware, Enabling or Disabling x86 BootBIOS

Page 16

The Maintenance tab displays the following:

•Firmware Version- the version of firmware installed on the HBA.

•Operational Firmware Name- the name of the firmware in use by the HBA.

•SLI-1 Firmware Name- the name of the firmware installed in the HBA’s SLI™-1 slot.

•SLI-2 Firmware Name- the name of the firmware installed in the HBA’s SLI-2 slot.

•Boot Bios- when enabled, indicates the version of x86 BootBIOS on the system.

Updating Firmware

Use the Maintenance tab to update the selected HBA’s firmware.

To update firmware, do the following:

1.In the discovery tree, select the HBA whose firmware you wish to update.

2.Click the Maintenance tab.

3.Click Update Firmware. A message about resetting a boot adapter is displayed.

4.Click Yes. The Firmware Download dialog box is displayed.

5.Browse to the Emulex Repository or to the Emulex Installation CD.

6.Select the firmware file to download and click Start Download. A status bar displays the progress of the download.

7.After the firmware is downloaded, the adapter is automatically reset.

Enabling or Disabling x86 BootBIOS

Use the Maintenance tab to enable or disable the selected

HBA’s x86 BootBIOS.

Note: You do not need to enable x86 BootBIOS if it was enabled at the factory.

To enable or disable x86 BootBIOS, do the following:

1.In the discovery tree, select the HBA whose x86 BootBIOS you wish to enable or disable.

2.Click the Maintenance tab.

NetWin 110 HBA User’s Guide

Page 1-11

Image 16

Contents NetWin 110 HBA NetWin 110 HBA User’s Guide Using the AutoPilot Manager Utility Using a Microsoft Cluster ServerCannot See New LUNs Windows HBA Status LEDs Overview Using the AutoPilot Manager Utility Starting the AutoPilot Manager UtilityMenu Bar AutoPilot Manager Utility ElementsToolbar Property Windows and Property Pages Discovery TreeStatus Bar Discovering SAN Elements Modifying Discovery PropertiesViewing the Discovery Summary Viewing Host InformationManaging Host Bus Adapters Sorting HBAsReverting to an HBA’s Default Name Resetting an HBAEditing an HBA’s Name Viewing an HBA’s General Information Viewing Fabric Information Viewing Target InformationUpgrading Firmware and Enabling x86 BootBIOS Advanced Mode OperationViewing LUN Information Enabling or Disabling x86 BootBIOS Updating FirmwareChanging Current Settings Mapping Targets and Editing Persistent BindingsAuto-Persistent Binding Current MappingsPersistent Binding Configuration Updating Drivers Updating a Driver for WindowsBios Utility Configuration Guide Starting the Bios UtilityChanging the Default Alpa Enabling the Bios on an HBAChanging the Plogi Retry Timer Enabling and Disabling the Spinup Delay Changing the TopologySetting Auto Scan Enabling and Disabling EDDEnabling and Disabling the Start Unit Command Enabling and Disabling the Environment VariableEnabling and Disabling Auto Sector Format Select Configuring an Installed Drive As a Boot Device NetWin 110 HBA User’s Guide Installing Windows on a New Boot Device NetWin 110 HBA User’s Guide Using a Microsoft Cluster Server Page Specifications Laser Safety NoticeHardware Reference Certification and ClassificationProduct Information Labeling RequirementsNetWin 110 HBA User’s Guide B-2 Small Form Factor Transceiver 1x9 TransceiverUsage Restrictions NetWin 110 HBA User’s Guide B-3System Level Certification NetWin 110 HBA User’s Guide B-4Troubleshooting SCSIport Miniport Driver Does Not See TargetsAutoPilot Manager Utility Cannot See Other HBAs or Hosts Cannot See New LUNs WindowsHBA Status LEDs NetWin 110 HBA User’s Guide C-2