Emulex manual System Level Certification, NetWin 110 HBA User’s Guide B-4

Page 35

1x9 Transceiver

Short wavelength 1x9 transceivers allow normal data transmission on the optical link when they are connected to another compatible laser product. Short wavelength 1x9s embedded in Emulex host adapters are non-OFC. For non- OFC links, a compatible laser device must be non-OFC and certified as a Class 1 laser product.

Small Form Factor Transceiver

Short wavelength and long wavelength small form factor transceivers allow normal data transmission on the optical link when they are connected to another compatible laser product. Short wavelength and long wavelength small form factor transceivers embedded in Emulex host adapter are non-OFC. For non-OFC links, a compatible laser device must be non-OFC and certified as a Class 1 laser product.

Any system level product that incorporates the small form factor transceivers must provide power supply protection that guarantees a voltage of 5.0 volts or less at the small form factor transceivers. The functional power supply range of the small form factor transceivers product is specified as 3.135 to 3.465V typically. Operation outside of this range may degrade the performance and lifetime of the transceiver. The transceiver will remain operational with laser emissions below Class 1 limits provided the power supply level at the adapter remains at or below 5.0 volts. If the power supply level rises above 5.0 volts, the small form factor transceiver cannot be guaranteed to operate correctly and could result in laser emissions that may exceed Class 1 limits.

System Level Certification

All GLMs and GBICs sold as accessories by Emulex or host adapters containing embedded 1x9 or small form factor transceivers are certified as Class 1 laser products within the U.S. and Class 1 laser component assemblies outside of the U.S. Manufacturers of products properly incorporating the GLM, GBIC, 1x9 or small form factor transceiver do not need to recertify their product for laser safety. The procedure for full system certification is therefore identical to that used for any other electronic system. When applying for system level certification to electronic standards such as IEC950, the regulatory engineers may want to see the DHHS and European conformity labeling on the GLM, GBIC, 1x9 or small form factor transceiver, and the system level documentation and labeling. Copies of the certificate of conformity for any GLM, GBIC, 1x9 or small form factor transceiver sold by Emulex can be obtained upon request from Emulex Corporation, Costa Mesa.

NetWin 110 HBA User’s Guide

Page B-4

Page 34 Page 36
Image 35
Page 34 Page 36
Contents NetWin 110 HBA NetWin 110 HBA User’s Guide Using a Microsoft Cluster Server Using the AutoPilot Manager UtilityCannot See New LUNs Windows HBA Status LEDs Overview Starting the AutoPilot Manager Utility Using the AutoPilot Manager UtilityToolbar AutoPilot Manager Utility ElementsMenu Bar Status Bar Discovery TreeProperty Windows and Property Pages Modifying Discovery Properties Discovering SAN ElementsViewing Host Information Viewing the Discovery SummarySorting HBAs Managing Host Bus AdaptersEditing an HBA’s Name Resetting an HBAReverting to an HBA’s Default Name Viewing an HBA’s General Information Viewing Target Information Viewing Fabric InformationViewing LUN Information Advanced Mode OperationUpgrading Firmware and Enabling x86 BootBIOS Updating Firmware Enabling or Disabling x86 BootBIOSCurrent Mappings Changing Current SettingsMapping Targets and Editing Persistent Bindings Auto-Persistent BindingPersistent Binding Configuration Updating a Driver for Windows Updating DriversStarting the Bios Utility Bios Utility Configuration GuideChanging the Plogi Retry Timer Enabling the Bios on an HBAChanging the Default Alpa Changing the Topology Enabling and Disabling the Spinup DelayEnabling and Disabling EDD Setting Auto ScanEnabling and Disabling the Environment Variable Enabling and Disabling the Start Unit CommandEnabling and Disabling Auto Sector Format Select Configuring an Installed Drive As a Boot Device NetWin 110 HBA User’s Guide Installing Windows on a New Boot Device NetWin 110 HBA User’s Guide Using a Microsoft Cluster Server Page Certification and Classification SpecificationsLaser Safety Notice Hardware ReferenceNetWin 110 HBA User’s Guide B-2 Labeling RequirementsProduct Information NetWin 110 HBA User’s Guide B-3 Small Form Factor Transceiver1x9 Transceiver Usage RestrictionsNetWin 110 HBA User’s Guide B-4 System Level CertificationCannot See New LUNs Windows TroubleshootingSCSIport Miniport Driver Does Not See Targets AutoPilot Manager Utility Cannot See Other HBAs or HostsNetWin 110 HBA User’s Guide C-2 HBA Status LEDs
Top Page Image Contents