Emulex manual NetWin 110 HBA User’s Guide

Page 27

7.Select an entry. Another window displays the following options:

1.Boot this device via WWPN

2.Boot this device via DID

8.Press the number corresponding to the desired boot method.

If you select to boot the device via WWPN, the WWPN of the earlier selected entry is saved in the flash. However, during the initial BIOS scan, it will issue a Name Server Inquiry GID_PN (Get Port Identifier). Then, based on this DID, it will continue with the remainder of the scanning.

If you select to boot this device via DID, the earlier selected entry will be saved in the flash.

9.Press x to exit the BIOS utility and reboot the system.

NetWin 110 HBA User’s Guide

Page 4-2

Image 27

Contents NetWin 110 HBA NetWin 110 HBA User’s Guide Using a Microsoft Cluster Server Using the AutoPilot Manager UtilityCannot See New LUNs Windows HBA Status LEDs Overview Starting the AutoPilot Manager Utility Using the AutoPilot Manager UtilityAutoPilot Manager Utility Elements Menu BarToolbar Discovery Tree Property Windows and Property PagesStatus Bar Modifying Discovery Properties Discovering SAN ElementsViewing Host Information Viewing the Discovery SummarySorting HBAs Managing Host Bus AdaptersResetting an HBA Reverting to an HBA’s Default NameEditing an HBA’s Name Viewing an HBA’s General Information Viewing Target Information Viewing Fabric InformationAdvanced Mode Operation Upgrading Firmware and Enabling x86 BootBIOSViewing LUN Information Updating Firmware Enabling or Disabling x86 BootBIOSCurrent Mappings Changing Current SettingsMapping Targets and Editing Persistent Bindings Auto-Persistent BindingPersistent Binding Configuration Updating a Driver for Windows Updating DriversStarting the Bios Utility Bios Utility Configuration GuideEnabling the Bios on an HBA Changing the Default AlpaChanging the Plogi Retry Timer Changing the Topology Enabling and Disabling the Spinup DelayEnabling and Disabling EDD Setting Auto ScanEnabling and Disabling the Environment Variable Enabling and Disabling the Start Unit CommandEnabling and Disabling Auto Sector Format Select Configuring an Installed Drive As a Boot Device NetWin 110 HBA User’s Guide Installing Windows on a New Boot Device NetWin 110 HBA User’s Guide Using a Microsoft Cluster Server Page Certification and Classification SpecificationsLaser Safety Notice Hardware ReferenceLabeling Requirements Product InformationNetWin 110 HBA User’s Guide B-2 NetWin 110 HBA User’s Guide B-3 Small Form Factor Transceiver1x9 Transceiver Usage RestrictionsNetWin 110 HBA User’s Guide B-4 System Level CertificationCannot See New LUNs Windows TroubleshootingSCSIport Miniport Driver Does Not See Targets AutoPilot Manager Utility Cannot See Other HBAs or HostsNetWin 110 HBA User’s Guide C-2 HBA Status LEDs