Cabletron Systems HSIM-G01 manual Connecting to the Network, HSIM-G Port Designations

Page 20

Chapter 2: Installation

11.Secure the HSIM-G to the module standoffs using the standoff screws saved in step 6.

Ensure that the chassis cover is in place before reconnecting the power cord.

12.Reattach the chassis cover to the standalone device, reconnect the power cord, and reconnect the standalone device to the network.

2.3CONNECTING TO THE NETWORK

The HSIM-G has an SC style connector for the network port. Cabletron Systems offers fiber optic cables that use SC style connectors which are keyed to ensure proper crossover of the transmit and receive fibers. Check the fiber specifications in Appendix A for each HSIM-G carefully before connecting an HSIM-G to the network.

HSIM-G

SX

LNK

NOTES

Receive (RX) Port

Transmit (TX) Port

2398_RxTxPorts

Figure 2-3 HSIM-G Port Designations

An odd number of crossovers (preferably one) must be maintained between like devices so that the transmit port of one device is connected to the receive port of the other device and vice versa.

If the fiber optic cable being used has SC style connectors that do not resemble MIC style connectors, or has SC connectors on one end and a different type on the other, such as ST connectors, ensure that the proper cross over occurs.

2-6

HSIM-G01/G09 User’s Guide

Image 20
Contents HSIM-G01/G09 User’s Guide Page HSIM-G01/G09 User’s Guide Industry Canada Notice Cabletron Software Program License HSIM-G01/G09 User’s Guide Declaration of Conformity HSIM-G01/G09 User’s Guide Contents Contents Viii HSIM-G01/G09 User’s Guide Chapter Introduction HSIM-G01Using this Manual Document ConventionsGetting Help Your email addressLanview Diagnostic LEDs OverviewConnectivity Related DocumentationChapter Installation Unpacking the HSIM-GInstalling AN HSIM-G Installing an HSIM-G in an Interface ModuleInstalling an HSIM-G Installing the HSIM-G Installing an HSIM-G in a Standalone Device Connecting to the Network HSIM-G Port DesignationsHSIM-G Network Connection Key Latch bottom of SC Connector Keys Bottom view HSIM-G09 Connection Using Multimode Cable Launch Mode Conditioning Cable Connection for the HSIM-G09HSIM-G01/G09 User’s Guide Chapter Lanview LEDsChapter Chapter Local Management Navigating Local Management ScreensGigabit Ethernet Configuration Screen Local ManagementGigabit Ethernet Configuration Screen 1 Configuring the HSIM-G Port Setting the Operational Mode Setting the Advertised AbilityHSIM-G01/G09 User’s Guide HSIM-G01 Specifications 1000Base-SX Appendix a SpecificationsGigabit Ethernet Specifications HSIM-G09 Specifications 1000Base-LX Appendix a SpecificationsRegulatory Compliance Physical PropertiesEnvironmental Requirements HSIM-G01/G09 User’s Guide