Chapter 1: Introduction
Chapter 3, LANVIEW LEDs, describes how to use the HSIM-FE6 LEDs to monitor the HSIM performance and status.
Appendix A, Specifications, lists the operating specifications and regulatory compliance of the HSIM-FE6.
Appendix B, FEPIM Specifications, describes the FEPIM specifications and regulatory compliance.
1.2OVERVIEW
The HSIM-FE6 extends the functionality of certain Cabletron Systems interface modules or standalone devices by providing high-speed uplink capability through Fast Ethernet technology with different types of media.
1.2.1Connectivity
The HSIM-FE6 module supports Fast Ethernet technology, using interchangeable Fast Ethernet Port Interface Modules (FEPIMs). The FEPIMs support three types of media connectivity: RJ45 Category 5 unshielded twisted pair, and SC connectors for either single or multimode fiber. The FEPIMs support an uplink to 100 Mbps Fast Ethernet backbones or a high speed connection to a local server.
1.2.2Local Management
The HSIM-FE6 is managed through the host device in which it is installed. For information concerning Local Management for the HSIM-FE6, refer to the manual for the host platform. For details on obtaining the host platform manual, refer to Section 1.6.
1.2.3Full Duplex Switched Ethernet
The optional Fast Ethernet (Port) Interface Modules for the HSIM-FE6can be configured to operate in Full Duplex Switched Ethernet mode.
1.2.4LANVIEW Diagnostic LEDs
Cabletron Systems provides a visual diagnostic and monitoring system called LANVIEW. The HSIM-FE6 LANVIEW LEDs help you quickly identify transmit and receive status. Chapter 3 provides information on the HSIM-FE6 LEDs and the FE-100TX LED.
