Cabletron Systems HSIM-FE6 manual Installing the Fepim

Chapter 2: Installation

Module

Module

Connector

Rear

Standoff

FE-	10
100TX	100

HSIM-FE6

HSIM-FE6

Connector

Front

Standoffs

feinstall

Figure 2-2 Installing the FEPIM

4.Press down firmly on the FEPIM until the pins slide all the way into the HSIM-FE6 connector. Ensure that the FEPIM seats flush on the standoffs.

5.Secure the FEPIM using the screws enclosed in the FEPIM packaging. The screw used to attach the rear of the FEPIM to the standoff is optional and not necessary for proper installation. Refer to Figure 2-2.

If SC protective covers were removed from a fiber FEPIM,

TIP replace the covers until the port is connected to the network to reduce the chance of dust and contaminants entering the port.

2-4 HSIM-FE6 User’s Guide