Cabletron Systems BRIM-F6 manual Installing the FPIMs, Fpim Screws

CHAPTER 2: INSTALLATION

2.2Installing the FPIMs

To install an FPIM into the BRIM-F6:

1.Remove the screws securing the FPIM coverplate and the coverplate. See Figure 2-1.

2.Insert the connector pins of the FPIM into the connector on the BRIM-F6. See Figure 2-2.

FPIM Screws

FPIM

FOR

RESERVED

				-F6
			BRIM -
				F6
			BRIMRCV
			XMT	RCV
			PWR XMT
			PWR
				TWR
		FPIM	WRP	TWR
FOR			LNK WRP
RESERVED			LNK
	B
FPIM	B
FPIM

STS	A
STS	FPIM
LNK
LNK

FPIM Coverplate

Figure 2-1. Removing the FPIM Coverplate

3.Press down firmly on the FPIM until the pins slide all the way into the connector holes.

4.Secure the FPIM with the screws provided.

Page 2-2 BRIM-F6 User’s Guide