Cabletron Systems 6H258-17, 6H259-17 manual Switching Options, Distributed Chassis Management

Page 27

Overview

1.1.13 Switching Options

SmartSwitches provide 802.1Q switching or SecureFast Switching Virtual Network Services between all of the front panel interfaces including any optional HSIM or VHSIM. In the 802.1Q mode (the default mode of operation), the switch functions as an 802.1D switch until VLANs are configured.

SecureFast switching and IEEE 802.1Q switching allow migration to Virtual Network technologies without requiring the replacement of existing equipment.

1.1.14 Distributed Chassis Management

From a management perspective, the 6C105 SmartSwitch 6000 chassis can be viewed as a single entity with a single IP address. Its systems management functions are distributed to all modules. The chassis can be managed using a single IP address, or the modules can be managed separately by individual IP addresses. When using a single IP address, system wide settings can be done from the chassis menu in Local Management, while module settings are done by selecting the specific module to be modified and changing the settings for that module.

1.1.15 Optional HSIMs and VHSIMs

The SmartSwitches provide a slot for an optional High Speed Interface Module (HSIM) or Very High Speed Interface Module (VHSIM) for additional connectivity to various networking technologies. Any exceptions to the HSIMs and VHSIMs that operate in the SmartSwitch modules are listed in the Release Notes shipped with the SmartSwitch.

1.1.16 Standards Compatibility

The SmartSwitch modules are fully compliant with the IEEE 802.3, 802.3x, 802.3u, 802.1D, and specifically 802.1Q standards. SmartSwitches provide IEEE 802.1D Spanning Tree Algorithm (STA) support to enhance the overall reliability of the network and protect against “loop” conditions.

SmartSwitches support a wide variety of industry standard MIBs including RFC 1213 (MIB II), RFC 1757 (RMON), RFC 1493 (Bridge MIB), RFC 1354 (FIB MIB), and RFC 1190 (Path MTU Discovery). A full suite of Cabletron Systems Enterprise MIBs provide a wide array of statistical information to enhance troubleshooting.

For information about how to extract and compile individual MIBs, contact Cabletron Systems.

Introduction 1-7

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 9033381 Page Page FCC Notice Cabletron SYSTEMS, INC Program License Agreement Page Page Page Cabletron Systems Limited Program License Agreement Viii Class 1 Laser Transceivers Declaration of Conformity Contents Troubleshooting Figures Tables Contents of SmartSwitch Shipping ContainerAbout This Guide Using this GuideStructure of this Guide Related Manuals Following conventions are used throughout this document Document ConventionsOverview IntroductionCPU LED Full Duplex Switched Ethernet ConnectivityRuntime IP Address Discovery Port/VLAN Redirect Functions SmartTrunkRemote Monitoring Rmon Broadcast SuppressionRate Limiting Garp Switch OperationFlow Control 11 802.1 Port PriorityManagement Standards Compatibility Switching OptionsDistributed Chassis Management Optional HSIMs and VHSIMsLanview Diagnostic LEDs Year 2000 ComplianceGetting Help Network Requirements 100BASE-FX NetworkMultimode Fiber Optic Cabling Single Mode Fiber Optic Cabling Unpacking the Smartswitch InstallationInstalling the Smartswitch Into the 6C105 Chassis Installing OptionsInstalling an Interface Module Connecting to the Network Connecting to the NetworkConnecting a Fiber Optic Segment to the SmartSwitch Completing the Installation Using Lanview TroubleshootingReceive LED Transmit LED CPU Refer to your Local Management Troubleshooting Checklist Power System Troubleshooting Refer to your Local Management User’s Guide for proper Refer to your Local Management User’s Guide for IP Device Setup Troubleshooting 6H258-17 Using the Reset ButtonSpecifications Module SpecificationsPhysical Properties Environmental Requirements INPUT/OUTPUT PortsCOM Port Pinout Assignments Options for both the 6H258-17 and the 6H259-17 Regulatory CompliancePage Setting the Mode Switches Switch Settings, Upgrades, and InstallationsFigure B-1 Module Mode Switch Location/Component Layout Locating SIMMs Simm UpgradeFigure B-2 Simm Slot Locations Installing the Dram SimmFigure B-3 Installing the Dram Installing Optional High Speed Interface ModulesDram Numerics IndexIndex-2

6H259-17, 6H258-17 specifications

Cabletron Systems, a pioneer in computer networking and telecommunications, has consistently delivered innovative solutions tailored to meet the evolving demands of network infrastructure. Among its notable offerings are the models 6H258-17 and 6H259-17, which showcase advanced technological features designed to optimize network performance, reliability, and scalability.

The 6H258-17 stands out as a high-performance network switch, boasting 24 Ethernet ports, facilitating efficient data transfer and connectivity among multiple devices. Its architecture supports both 10BASE-T and 100BASE-TX Ethernet standards, providing flexibility in deploying a variety of network configurations. The switch also employs innovative packet-switching technology, ensuring low-latency communication and enhanced throughput, which is critical for bandwidth-intensive applications.

On the other hand, the 6H259-17 acts as a versatile router and works seamlessly with the 6H258-17 switch, creating a cohesive networking solution. This model is equipped with a robust routing protocol suite, including RIP and OSPF, to facilitate intelligent data routing across networks. Its ability to accommodate various WAN interfaces further enhances its adaptability in different networking environments, making it suitable for both small businesses and larger enterprise setups.

One of the key characteristics of both models is their modular design, which allows for easy upgrades and expansions as the networking requirements grow. Users can invest in additional modules or line cards, enabling them to scale their systems without the need for complete replacements. This feature not only extends the lifespan of the equipment but also aligns with cost-effective budgeting strategies.

In terms of security, Cabletron Systems has integrated sophisticated features into both products to safeguard data integrity and prevent unauthorized access. The ability to implement VLANs and access control lists ensures that only authorized users can access sensitive information. This focus on security is paramount in today’s landscape, where data breaches pose significant risks to organizations of all sizes.

Additionally, both the 6H258-17 and 6H259-17 are designed for easy management and monitoring. With a user-friendly interface and support for SNMP, network administrators can efficiently oversee network activities, troubleshoot issues, and optimize performance.

In conclusion, the Cabletron Systems 6H258-17 and 6H259-17 represent powerful networking solutions that combine performance, scalability, security, and ease of management. Their advanced technologies make them a valuable choice for organizations looking to enhance their network infrastructure while ensuring future growth and adaptability.
Top Page Image Contents