Cabletron Systems 6H258-17, 6H259-17 manual Device Setup Troubleshooting

Page 45

 

 

 

Troubleshooting Checklist

 

 

 

 

 

Table 4-6 Device Setup Troubleshooting

 

 

 

 

 

Possible Causes

Instruction

 

 

 

 

 

 

 

The SmartSwitch detect a

1.

Verify that Spanning Tree is enabled. Refer to the Local

 

looped condition.

 

Management User’s Guide for instructions on setting the

 

 

 

type of STA.

 

 

2.

Review network design and delete unnecessary loops.

 

 

 

 

 

 

Mode switch (7),

1.

Reenter the lost parameters as necessary. Refer to the Local

 

NVRAM Reset, was

 

Management User’s Guide for instructions on configuring

 

changed sometime before

 

the device through Local Management.

 

either cycling power or

2.

Call Cabletron Systems if the problem continues.

 

pressing the RESET

 

 

 

 

 

button, causing the

 

 

 

 

user-entered parameters to

 

 

 

 

reset to factory default

 

 

 

 

settings.

 

 

 

 

 

 

 

 

 

Clear NVRAM was set

1.

Reenter the lost parameters as necessary. Refer to the Local

 

through Local

 

Management User’s Guide for instructions on configuring

 

Management.

 

the device through Local Management.

 

 

2.

Call Cabletron Systems if the problem continues.

 

 

 

 

 

NOTE

If these troubleshooting tables do not solve any problems that occur with the SmartSwitch, contact Cabletron Systems. Refer to Section 1.2 for details.

Troubleshooting 4-9

Image 45
Contents 9033381 Page Page FCC Notice Cabletron SYSTEMS, INC Program License Agreement Page Page Page Cabletron Systems Limited Program License Agreement Viii Class 1 Laser Transceivers Declaration of Conformity Contents Troubleshooting Figures Tables Contents of SmartSwitch Shipping ContainerAbout This Guide Using this GuideStructure of this Guide Related Manuals Following conventions are used throughout this document Document ConventionsOverview IntroductionCPU LED Full Duplex Switched Ethernet ConnectivityRuntime IP Address Discovery Remote Monitoring Rmon SmartTrunkBroadcast Suppression Port/VLAN Redirect FunctionsRate Limiting Garp Switch OperationFlow Control 11 802.1 Port PriorityManagement Distributed Chassis Management Switching OptionsOptional HSIMs and VHSIMs Standards CompatibilityLanview Diagnostic LEDs Year 2000 ComplianceGetting Help Network Requirements 100BASE-FX NetworkMultimode Fiber Optic Cabling Single Mode Fiber Optic Cabling Unpacking the Smartswitch InstallationInstalling the Smartswitch Into the 6C105 Chassis Installing OptionsInstalling an Interface Module Connecting to the Network Connecting to the NetworkConnecting a Fiber Optic Segment to the SmartSwitch Completing the Installation Using Lanview TroubleshootingReceive LED Transmit LED CPU Refer to your Local Management Troubleshooting Checklist Power System Troubleshooting Refer to your Local Management User’s Guide for proper Refer to your Local Management User’s Guide for IP Device Setup Troubleshooting 6H258-17 Using the Reset ButtonSpecifications Module SpecificationsPhysical Properties Environmental Requirements INPUT/OUTPUT PortsCOM Port Pinout Assignments Options for both the 6H258-17 and the 6H259-17 Regulatory CompliancePage Setting the Mode Switches Switch Settings, Upgrades, and InstallationsFigure B-1 Module Mode Switch Location/Component Layout Locating SIMMs Simm UpgradeFigure B-2 Simm Slot Locations Installing the Dram SimmFigure B-3 Installing the Dram Installing Optional High Speed Interface ModulesDram Numerics IndexIndex-2

6H259-17, 6H258-17 specifications

Cabletron Systems, a pioneer in computer networking and telecommunications, has consistently delivered innovative solutions tailored to meet the evolving demands of network infrastructure. Among its notable offerings are the models 6H258-17 and 6H259-17, which showcase advanced technological features designed to optimize network performance, reliability, and scalability.

The 6H258-17 stands out as a high-performance network switch, boasting 24 Ethernet ports, facilitating efficient data transfer and connectivity among multiple devices. Its architecture supports both 10BASE-T and 100BASE-TX Ethernet standards, providing flexibility in deploying a variety of network configurations. The switch also employs innovative packet-switching technology, ensuring low-latency communication and enhanced throughput, which is critical for bandwidth-intensive applications.

On the other hand, the 6H259-17 acts as a versatile router and works seamlessly with the 6H258-17 switch, creating a cohesive networking solution. This model is equipped with a robust routing protocol suite, including RIP and OSPF, to facilitate intelligent data routing across networks. Its ability to accommodate various WAN interfaces further enhances its adaptability in different networking environments, making it suitable for both small businesses and larger enterprise setups.

One of the key characteristics of both models is their modular design, which allows for easy upgrades and expansions as the networking requirements grow. Users can invest in additional modules or line cards, enabling them to scale their systems without the need for complete replacements. This feature not only extends the lifespan of the equipment but also aligns with cost-effective budgeting strategies.

In terms of security, Cabletron Systems has integrated sophisticated features into both products to safeguard data integrity and prevent unauthorized access. The ability to implement VLANs and access control lists ensures that only authorized users can access sensitive information. This focus on security is paramount in today’s landscape, where data breaches pose significant risks to organizations of all sizes.

Additionally, both the 6H258-17 and 6H259-17 are designed for easy management and monitoring. With a user-friendly interface and support for SNMP, network administrators can efficiently oversee network activities, troubleshoot issues, and optimize performance.

In conclusion, the Cabletron Systems 6H258-17 and 6H259-17 represent powerful networking solutions that combine performance, scalability, security, and ease of management. Their advanced technologies make them a valuable choice for organizations looking to enhance their network infrastructure while ensuring future growth and adaptability.