Lexmark 90E, 901 Memory card troubleshooting, Network troubleshooting, Reinsert the Memory Card

Troubleshooting			163
	Error Message:	What it indicates:	Possible solutions:
	No Answer	Auto Answer may have been turned off	• Verify the number, and then resend
		on the receiving fax machine.	the fax.
			• Set the printer to redial.
			Note: Depending on your country
			or region, there may be a limit on
			the number of redial attempts,
			regardless of the redial settings
			that you set in your printer.
			• Schedule to resend the fax at a later
			time.
	No Caller ID	Your printer stopped the call because	Disable Block No‑ID.
	Call Stopped	the incoming fax has no sender
		information. You may have chosen to
		block faxes with no Caller ID or faxes
		without Caller IDs are not allowed in
		your country or region.

To troubleshoot error messages in the fax software, click Help to view the help information for the fax software.

Memory card troubleshooting

•“Memory card troubleshooting checklist” on page 163

•“Nothing happens when a memory card is inserted” on page 163

Memory card troubleshooting checklist

Before you troubleshoot, use the following checklist to solve most memory card problems:

•Make sure that the memory card you are using can be used in the printer.

•Make sure the memory card is not damaged.

•Make sure memory card contains supported file types.

Nothing happens when a memory card is inserted

If the "Memory card troubleshooting checklist" does not solve the problem, then try the following:

REINSERT THE MEMORY CARD

The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.

Network troubleshooting

•“Network troubleshooting checklist” on page 164

•“The Continue button is unavailable” on page 165

•“Computer firewall is blocking communication with the printer” on page 166

•“Communication with printer lost when connected to Virtual Private Network (VPN)” on page 166