Lexmark 90T9200 Faxing FAQ, Receiving faxes manually, Fax Setup Ringing and Answering Auto Answer

Faxing 88

Tips:

•If the printer is sharing the line with other analog devices (telephone, answering machine), then set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call. If the printer is on a dedicated fax line, then you may set the printer to pick up on any number of rings.

•If you have multiple numbers on a single line, or if you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically.

Receiving faxes manually

1Make sure that Auto Answer is off:

aFrom the home screen, navigate to:

> Fax Setup > Ringing and Answering > Auto Answer

bIf Auto Answer is not set to Off, touch Off, and then touch Accept.

2When the telephone rings and you hear fax tones when you pick up the handset, press on the printer or *9* on the telephone attached to the printer.

Note: The default code for answering faxes manually is *9*, but for increased security, you can change it to a number that only you know. You can enter up to 7 characters for your code. The valid characters are the digits 0–9 and the characters # and *.

Warning—Potential Damage: Do not touch the cables or the and ports while actively receiving a fax.

Faxing FAQ

If I skipped the fax setup initially, do I need to run the installer again to set up the fax?

You do not need to run the installer again. You can set up and configure the fax through the fax software that was installed with the printer software.

1Connect the printer to the telephone line. For more information, see “Setting up the printer to fax” on page 71.

2Configure the fax settings using the fax software. To access the fax software:

For Windows users

aClick or Start.

bClick All Programs or Programs, and then select the printer program folder from the list.

cClick Printer Home > Fax >Set up the printer to fax. The Fax Setup Wizard opens.

dRun the wizard. Make sure you select the correct telephone service and connection. The wizard configures optimal fax settings based on your connection.