Lexmark 90E, 901, 90T9251 Working with photos, Using a memory card or flash drive with the printer

Printing 44

Working with photos

Using a memory card or flash drive with the printer

Insert a memory card into the card slot or a flash drive into the USB port

Inserting a memory card Inserting a flash drive

SD/MS- Duo/MMC SD/MS- Duo/MMC

E

DRIV

FLASH

Notes:	Notes:
• Insert the card with the brand name label facing up.	• The flash drive uses the same port that is used
• Make sure any arrows on the card point toward the printer.	for a PictBridge camera cable.
• If necessary, connect the memory card to the adapter that	• An adapter may be necessary if your flash drive
	does not fit directly into the port.
came with it.

•Make sure that the memory card inserted is supported by the printer. For more information, see “Supported memory cards and file types” on page 45.

•The card reader light comes on when a memory card is inserted and blinks when a memory card is being accessed.

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

SD/MS-Duo/MMC

E

DRIV

FLASH

The Memory Device screen appears on the display.

Notes:

•If the printer does not recognize the memory device, then remove and reinsert it.

•If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is

in the card slot, then the display prompts you to choose which memory device to use.