Lexmark 90E, 901 For Macintosh users with an AirPort base station, Click Advanced or Configure

Networking 121

For Macintosh users with an AirPort base station

In Mac OS X version 10.5 or later

1From the Apple menu, navigate to: System Preferences > Network > AirPort

The SSID of the network that the computer is connected to is displayed in the Network Name menu.

2Write down the SSID.

In Mac OS X version 10.4 or earlier

1From the Finder, navigate to: Applications > Internet Connect > AirPort

The SSID of the network that the computer is connected to is displayed in the Network menu.

2Write down the SSID.

For Macintosh users with an access point

1Type the IP address of the access point in the address field of your Web browser and continue to step 2. If you do not know the IP address of the access point, then do the following:

aFrom the Apple menu, navigate to: System Preferences > Network > AirPort

bClick Advanced or Configure.

cClick TCP/IP.

The Router entry is typically the access point.

2Type your user name and password when prompted, and then click OK.

3In the Wireless settings section, look for the SSID.

4Write down the SSID, security type, and the WEP key/WPA passphrase (if shown).

Notes:

•Make sure you copy the network information down exactly, including any capital letters.

•Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.

Can I use my printer on a USB and a network connection at the same time?

Yes; the printer supports a simultaneous USB and network connection. The printer can be configured in the following ways:

•Locally attached (connected to a computer using a USB cable)

•Wireless network

•Ethernet network

•Wireless network and locally attached simultaneously

•Ethernet network and locally attached simultaneously